Operation Manual

For emergencies
6-15
6
13. Pull out the compressor hose (M) from the side of the tire
compressor, and then securely attach the hose to the tire
valve (H).
14. Place the compressor (N) with its air pressure gauge (O)
on top.
Pull out the compressor’s power cord (P), insert the plug
on the cord into the 12 V power outlet (Q), and then turn
the electric motor switch to the “ACC” position.
Turn ON the compressor switch (R) and inflate the tire to
the specified pressure. (Refer to “Tire inflation pressures”
on page 7-21.)
If there is a gap between the tire and wheel, push the tread
area toward the center of the wheel to close the gap before
running the compressor.
BK0140800US.book 15 ページ ２０１１年９月２９日 木曜日 午後３時２８分