Operation Manual

Vehicle care and maintenance
7-43
7
4. Turn the socket counterclockwise to remove it.
N
OTE
● The tail and stop lights use LEDs rather than bulbs.
For repair and replacement, contact a certified i-MiEV
dealer.
5. Pull the bulb out of the socket.
6. To install the bulb, perform the removal steps in reverse.
C- Tail and stop light (LED) - cannot be replaced
D- Rear turn signal light
E- Back up light
BK0140800US.book 43 ページ ２０１１年９月２９日 木曜日 午後３時２８分