Operation Manual
1-32
General information/Charging
1
Cleaning the EV charging cable
N01203000013
1. Gently wipe outside surface of the EV charging cable with
gauze or a similar soft cloth soaked with a mild soap and
water solution.
2. Wipe off all detergent with a soft cloth dipped in fresh
water and thoroughly wrung out.
3. Wipe all moisture off and dry in a shaded, well-ventilated
area.
Regular charging (using 240V Electric
Vehicle Supply Equipment)
N01216100018
You can charge your vehicle through the regular charging port
using 240V Electric Vehicle Supply Equipment (EVSE) com-
patible with i-MiEV.
Carefully read instructions on “Precautions during charging the
main drive lithium-ion battery” on page 1-18, described in this
section.
For connecting/disconnecting the charging connector to/from
the vehicle, follow instructions for the regular charging (charg-
ing method with rated AC 120V outlet) on page 1-20. Also fol-
low instructions provided with the 240V EVSE.
N
OTE
● The 240V EVSE compatible with i-MiEV is available
separately. Contact a certified i-MiEV dealer.
WARNING
!
● Before cleaning, be sure to remove the charging
cable plug from the socket and the regular charging
plug from the vehicle. Do not connect or disconnect
the plug with a wet hand. Doing so can cause an elec-
tric shock.
● Never expose the metal terminal of the regular
charge connector or the charging cable plug to
water or neutral detergent.
Water or detergent entering into the plugs can cause
a fire or an electric shock.
CAUTION
!
● Never use benzine, petrol, organic solvents, acid, or
alkaline solvents to clean the charging cable. Doing
so could cause deformation, discolour, or malfunc-
tion. Also, these substances may be present in vari-
ous cleaners, so check carefully before use.
CAUTION
!
● Be sure to use a 240V EVSE compatible with i-
MiEV. Use of a non-compatible 240V EVSE may not
charge the main drive lithium-ion battery correctly
or may damage the main drive lithium-ion battery.
BK0140800US.book 32 ページ 2011年9月29日 木曜日 午後3時28分