Operation Manual

1-40
General information/Charging
1
Quick charge is dis-
continued.
Charging is stopped by the quick
charge timer.
Charging will stop depending on the timer function setting of the quick
charge device.If you need to charge the main drive lithium-ion battery
more, start the charging procedure again.
Charging stops at 80% capacity. Charging is designed to stop when the main drive lithium-ion battery
capacity reaches 80%. If you need to charge the main drive lithium-ion
battery more than 80%, start the charging procedure again.
The power supply for the quick
charger is off.
Check whether the power supply for the quick charger is off.
Symptom Possible cause Possible solution
BK0140800US.book 40 ページ ２０１１年９月２９日 木曜日 午後３時２８分