Operation Manual

1-52
General information/Charging
1
5. Press the power/communication switch (B) for less than 1
second to send the setting data to the vehicle.
The MiEV Remote will sound melodies on transmission
and reception.
N
OTE
● The melodies can be turned off. Refer to “To turn on/off
melody and buzzer” on page 1-63.
● If a communication error occurs or the MiEV Remote
System is not functioning properly, the buzzer will sound.
Refer to “Display of MiEV Remote during communicat-
ing with vehicle” on page 1-57.
● If the OFF Timer is unset when setting the ON timer, the
OFF timer will be automatically set with “fully charged”.
● To set OFF Timer, refer to “To set OFF Timer” on page 1-
54.
6. To turn off the MiEV Remote, refer to “To turn the MiEV
Remote ON/OFF” on page 1-50.
N
OTE
● The energy level gauge in the instrument panel on the
vehicle will illuminate and the charging indicator will
blink approximately 30 seconds after the vehicle has
received the setting for the ON timer.
After approximately 30 seconds, the energy level gauge
and the charging indicator will go off, and the vehicle will
be prepared for the Charging Timer.
Energy level gauge
Charging indicator
BK0140800US.book 52 ページ ２０１１年９月２９日 木曜日 午後３時２８分