Operation Manual

General information/Charging

1-53

● Turning the electric motor switch to the “ON” position or

the “ACC” position will cancel the Charging Timer.

● If the MODE switch is pressed while changing the ON

timer setting, the change will be canceled.

● The symbol on the MiEV Remote will be illumi-

nated while the vehicle is charging.

● If the charge connector is disconnected before the time set

by the ON timer, the Charging Timer is not canceled. If

the charge connector is re-connected again before starting

the charge or setting the charge timers, the Charging

Timer will resume.

To start the charging immediately after the ON timer

has been set

N01206000014

1. Turn on the MiEV Remote. Refer to “To turn the MiEV

Remote ON/OFF” on page 1-50.

2. Press the UP switch (C) or the DOWN switch (D) once,

and the remaining time from the present to the time set for

the ON timer will be displayed and blink.

3. Change the remaining time to 0h by pressing the UP

switch (C) or the DOWN switch (D).

4. Press the power/communication switch (B) for less than 1

second to send the setting data to the vehicle. The MiEV

Remote will sound melodies on transmission and recep-

tion. The charging will start.

Refer to “Regular charging (charging method with rated

AC 120 V outlet)” on page 1-20.

BK0140800US.book 53 ページ２０１１年９月２９日　木曜日　午後３時２８分