MODEL L65–A90 Owner’s Guide Downloaded From TV-Manual.
Downloaded From TV-Manual.
For Your Records Record the model number, serial number, and purchase date of your TV. The model and serial numbers are on the back of the TV. Refer to this page when requesting assistance with the TV.
Important Safety Instructions Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Outdoor Antenna Grounding If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
Laser Safety Safe Operation • • Caution. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Use external or remote controls to operate the product. Connection to signal sources and power are accomplished through the external connectors. Damage and Repair This label is located on the left lower back of the television set. Laser Hazard • • • • • This TV is a CLASS 1 laser product.
Contents Important Information About Your TV Important Safety Instructions. . . . . . . Installation and Operating Notes . . . . . . . . . . . . . . . . . . . . . . 1 Television Overview Welcome Kit . . . . . . . . . . . . . . . . . . . . . Special Features of Your TV. . . . . . . . . . . TV Control Panel and Convenience Inputs TV Main Panel . . . . . . . . . . . . . . . . . . . . 4 7 9 . 9 10 12 . . . . . . . . . . . . . . . . . . . . .
Installation and Operating Notes Transportation Screws Stand and Wall-Mount Requirements REMOVE AND SAVE TRANSPORTATION SCREWS BEFORE WATCHING TV This TV uses four transportation screws to protect the internal screen from damage when the TV is shipped or moved. CAUTION: Use this Mitsubishi TV model only with the Mitsubishi stand or wall-mount kit shown here. Other stands or wall-mounts may damage the TV or result in instability and possibly cause injury.
Cleaning Recommendations Screen Normally, light dusting with a dry, non-scratching duster will keep your TV clean. If cleaning beyond this is needed, please use the following guidelines: First turn off the TV and unplug the power cord from the power outlet. Occasionally clean dust build-up from the air-intake grilles on the back and sides of the TV. Clean using a vacuum cleaner with a brush attachment.
1 Television Overview Welcome Kit maintain them at 1080p through all processing until displayed. Please take a moment to review the following list of items to ensure that you have received everything. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Remote Control Two AA Batteries Owner’s Guide Quick Reference Guide Quick Connect Guide Product Registration Card Four-Ended IR Emitter Cleaning Cloth for Glossy Surfaces (see instructions under “Cleaning Recommendations,” page 8.
1. Television Overview Home Theater Control customized NetCommand-controlled home-theater system. NetCommand with IR Learning NetCommand for HDMI Your Mitsubishi HDTV offers a new level of networking that seamlessly integrates selected older A/V products with new and future digital products. NetCommand® supports IR (infrared) control of products such as VCRs, DVD players, cable boxes, and satellite receivers.
1. Television Overview 11 Front-Panel Indicators Front Panel Indicators 1. STATUS indicator. Off during normal TV operation. 2. POWER indicator. Lit when TV is powered on; flashes slowly when TV is powered off and the auto-on TV Timer is set. Flashes quickly immediately after the TV has been plugged into a power outlet. POWER and STATUS Indicator LEDs Off Steady On Slow Blinking Fast Blinking POWER Indicator LED Color TV Condition Additional Information None TV is powered off. Normal operation.
1. Television Overview TV Main Panel 1. ANT 1/ANT 2 (Antenna) ANT-2/AUX ANT-1/MAIN If you are connecting an antenna or direct cable service without a cable box, connect the main antenna or cable source to ANT 1. Use ANT 2 for a second source. 1 ANT 1 and ANT 2 can each receive digital and analog over-the-air channels from a VHF/UHF antenna or nonscrambled digital/analog cable source.
1. Television Overview 13 TV Back Panel, continued Mitsubishi recommends you use category 2 HDMI cables, also called high-speed HDMI cables, to connect HDMI 1.3 source devices. High-speed category 2 cables bring you the full benefits of Deep Color and x.v.Color. DVI Video. The HDMI inputs can also accept digital DVI video signals. • To connect a device’s DVI output to the TV’s HDMI input, use an HDMI-to-DVI adapter or cable plus analog audio cables.
2 TV Set-Up Guidelines for Setting Up and Using Your New Widescreen TV Getting Started 1. Check the TV cabinet for damage. If there is damage, do not plug in the TV. Call Mitsubishi Consumer Relations at (800) 332-2119. 2. Review the important safety, installation, and oper3. ating information at the beginning of this book. Choose a location for your TV. • • • • Allow at least four inches of space on all sides of the TV to help prevent overheating.
2. TV Setup 15 Guidelines for Setting Up and Using Your New Widescreen TV, continued • 8. 9. To connect the TV to a personal computer, see “Using the TV with a Personal Computer,” page 20. • Home-theater control can be set up after detection of each device or can be postponed until any convenient time afterward. - See chapter 6, “NetCommand IR Control,” to set up IR control of your home theater. - If you plan to use CEC-compatible devices with the TV’s NetCommand for HDMI feature, review Appendix D.
2. TV Setup Initial TV Setup Memorizing Channels For Reception on ANT 1 and ANT 2 To start channel memorization 1. Connect the incoming cable to ANT 1 or ANT 2. This is the cable from an antenna or a cable service without a cable box. 2. Press MENU to open the Main menu. 3. Press 4. to highlight the Setup icon and display the Setup menu. With the Setup menu displayed, press to highlight the Scan icon.
2. TV Setup Setting Up TV Inputs, continued Auto Input/Auto Output Sensing Screens See below for how different connections are handled by Auto Input/Auto Output Sensing. Setup Procedure for TV Inputs 1. Power on the TV. 2. Connect your devices to the TV, making note • Most Device Types. Select the device type from the on-screen list. The device type you select here will appear as an icon in the Input Selection menu. Press to highlight the device type connected to the input.
2. TV Setup Controlling A/V Receiver Sound Volume Setting Up TV Inputs, continued Tips on Auto Sensing and Changing Connected Devices • • • Choose a different name for each input. Antenna inputs (ANT 1/ANT 2) are never detected, although you can turn off unused antenna inputs in the Inputs > Name menu. You can change the device type displayed in the Input Selection menu by using the Inputs > Name menu (page 51). Any “learned” NetCommand IR codes will be erased, however.
2. TV Setup About Home-Theater Control Systems This summary offers some examples of the control methods available using the TV’s remote control. You may wish to use one or more of these methods in your home theater after completing Auto Input Sensing. Source device connected directly to the TV Remote Control Programming with Any Connection Type Program the remote control to operate the A/V device. To control the device, set the slide switch to the correct position for the device type.
2. TV Setup Using the TV with a Personal Computer Connecting a Computer to the TV VIDEO L - AUDIO - R INPUT 3 DVI/PC INPUT L - AUDIO - R L R AVR AUDIO OUTPUT L R IR NetCommand OUTPUT/ EXTERNAL CONTROLLER INPUT RS-232C AUDIO: PCM STEREO 3D GLASSES EMITTER VIDEO: 480i/480p/720p/1080i/1080p 2. 2. INPUT 2 Pr IMPORTANT This TV accepts digital computer signals only. Pb No additional audio connection is required.
2. TV Setup Using the TV with a Personal Computer Computer Video Adjustments 1. Power on the computer if it is not already on. 2. Select PC from the Input Selection menu. To do this, press INPUT to open the Input Selection menu, move the highlight to the PC icon, and press ENTER. Tip: Set the computer’s screen saver to display a pattern after several minutes of inactivity. This acts as a reminder that the TV is powered on. 3. Working from the computer, change the resolution 4.
3 TV Connections Before You Begin Auto Input Sensing Surround Sound The TV’s Auto Input Sensing feature automatically recognizes most connections and prompts you to identify the type of device connected. See page 16 for more on Auto Input Sensing. For best surround sound audio quality, route audiosignal cables or HDMI cables from the source device directly to your A/V receiver or sound system.
3. TV Connections HDMI Device (Cable Box, Satellite Receiver, DVD Player, or Other Device) Required: HDMI-to-HDMI cable. ANT-2/AUX ANT-1/MAIN TV main panel VIDEO Pr INPUT 2 L - AUDIO - R INPUT 3 Pb R R DVI/PC INPUT L - AUDIO - R L Pb Pr L YPbPr(480i/480p/720p/1080i) AVR AUDIO OUTPUT L IR NetCommand OUTPUT/ EXTERNAL CONTROLLER INPUT S-VIDEO DIGITAL AUDIO OUTPUT (INPUT 3) R Mitsubishi recommends you use category 2 (high-speed) HDMI cables to connect HDMI 1.3 source devices.
3. TV Connections DVI Video Device (Cable Box, Satellite Receiver, DVD Player, or Other Device) Connect DVI devices (digital only) to the TV’s HDMI input jacks. Analog stereo audio cables and a DVI-to-HDMI cable or DVI/HDMI adapter and HDMI cable are required. 1. Connect the DVI-to-HDMI cable (recommended) or HDMI cable with DVI/HDMI adapter from the DVI device’s back panel to the TV’s HDMI jack.
3. TV Connections Wall Outlet Cable (no cable box) Antennas with Separate UHF and VHF Leads You should connect the incoming cable for your primary viewing source to ANT 1/MAIN. Required: UHF/VHF combiner, coaxial extender 1. Connect the primary incoming coaxial lead cable to 1. Connect the UHF and VHF antenna leads to the UHF/VHF combiner. ANT 1 on the TV main panel. 2.
3. TV Connections VCR to a Cable Box (Audio & Video) VCR to an Antenna or Wall Outlet Cable Required: Two-way RF splitter, two coaxial cables, right and left analog audio cables, either S-video or composite video cable. 1. Connect the incoming cable or antenna to IN on the RF splitter. 2. Connect one coaxial cable from OUT on the RF 3. 4. 4. Incoming cable TV main panel L - AUDIO - R DVI/PC INPUT L - AUDIO - R L R 2. Cable box 7. IN 5. 6.
3. TV Connections 7. S-Video is preferable to composite video, if available. To use the TV speakers with the VCR, connect left (white) and right (red) audio cables from AUDIO OUT on the VCR back panel to the associated INPUT AUDIO L and R on the TV main panel. If your VCR is mono (non-stereo), connect only the white (left) cable. Note: When using this connection configuration with the connections used in step 5, it is possible to view live cable programs through the VCR Device.
3. TV Connections A/V Receiver (Sound System) Using the TV’s Audio Output Most setups require either a digital audio cable or analog stereo audio cables. To send audio from TV channels received on ANT 1, ANT 2, or devices connected directly to the TV, you must use one of the connections shown below. The TV makes all audio available in digital and analog formats: • Analog audio coming into the TV is output in digital stereo format on the DIGITAL AUDIO OUTPUT jack.
3. TV Connections Camcorder The TV’s INPUT 4 convenience inputs offer the easiest way to connect a camcorder. You can alternatively use jacks on the main connection panel. Two different connection options are described on this page. 2. A: Composite video plus audio L R Y/ VIDEO 1. USB Use jacks on the TV‘s INPUT 4 panel to connect a camcorder.
4 TV Operation and Features Choosing a Viewing Source Sleep Timer The Sleep Timer turns the TV off after the length of time you set. To set the TV to turn on at a certain time, see the Setup > Timer menu on page 49. Setting the Sleep Timer 1. Press SLEEP on the remote control. Input Selection menu 2. Press SLEEP additional times to increase the time in Choose a viewing source from the Input Selection menu. The current TV input appears as a full-color icon in this menu. 1.
4. TV Operation and Features Remote Control 1. POWER: Turns TV power on and off. 2. Slide Switch: Selects the A/V device to be operated by the remote control. Set the slide switch to TV for operation of the TV, and NetCommand-controlled devices. Control of additional devices requires programing (see Appendix C, “Programming the Remote Control.” 3. SLEEP: Sets the TV to turn off within 2 hours in increments of 30 minutes. 4.
4. TV Operation and Features Remote Control, continued For devices operating independently of NetCommand: The F1–F4 keys work like the A, B, C, D buttons on some cable boxes, satellite receivers, and DVD players. Program the remote control for your equipment and test the keys. See Appendix C, “Programming the Remote Control.” 25. (PAUSE): Freezes a broadcast TV picture from an antenna source, cable box, or satellite receiver (if key has not been reassigned for NetCommand use).
4. TV Operation and Features Status Display Ant 1 Press the INFO key to see the on-screen status display. The most common displays are shown here. You will rarely, if ever, see all status indicators at the same time. 2 3 7-1 KABC-HD 4 Monday Night Football 10 HD 16:9 Standard TV-PG 9 Stereo 11 6 7 FAV1 English 12 13 Tuesday 9:10 PM Sleep 30 min 5 On-screen status display sample information 1 15 MUTE St. Louis vs. Tampa Bay 8 8 14 Signal Strength 16 Analog Sources Digital Sources 1.
4. TV Operation and Features Fav (Favorite Channels) Use the six Fav channel banks to store groups of your favorite channels from ANT 1 and ANT 2. You can set up a Fav channel bank for each of your favorite program types or set up a bank for each TV user. You may prefer to perform Fav channel setup from a menu. See the Setup > Edit options, page 47.
4. TV Operation and Features TV Signals and Display Formats This is a 16:9 widescreen TV suitable for images available from HDTV and many DVDs. You can view olderstyle squarish images (4:3 aspect ratio) using one of the display formats described on this page. Press the FORMAT key to cycle through the available display formats. The TV remembers the format you last used for each input.
4. TV Operation and Features Viewing Camera Files JPEG Thumbnail Menu Use these keys while viewing JPEG thumbnail images. JPEG Photos and the USB Photo Port Keys for the JPEG Thumbnail Menu 1. Back up the data on 2. Move the highlight from image to image. your USB drive before connecting it to the TV. Mitsubishi is not USB responsible for file damage or data loss. INPUT 4 Connect your USB card Optional reader or USB drive to audio the TV’s USB Photo device port.
4. TV Operation and Features Slide Show USB Photo Menu Compatible Picture Files Use these keys during the slide show. • Still images recorded on digital cameras using the Exchangeable Image File Format, version 2.1 (EXIF 2.1) standard for digital still cameras and Design Rules for Camera File Systems version 1.0 (DCF 1.0) Some images opened and resaved on a computer may not play back or may not display in the thumbnail list. This happens if the files were resaved in an incompatible format.
4. TV Operation and Features 3D Video This section provides Instructions for viewing 3D video using the TV’s 3D feature. The 3D options are found in the Setup > 3D menu described on page 50 . Initial Set-Up 1. Check if your HDMI 3D video source device outputs 2. a 1080p 60-Hz signal. This information will be needed when you assign an input name in the Auto Input Sensing screen. If your 3D glasses came with an emitter box, connect the emitter box to the 3D GLASSES EMITTER jack on the back of the TV.
TV Menus 5 Main Menu Press MENU on the remote control to open the Main menu. Icon Menu Name and Description AV Menu Page Customize picture and sound settings. Turn closed captions on and off; customize Captions Menu caption displays. 40 45 Setup Menu Perform basic TV setup. Set language, scan (memorize) channels, set the TV clock, edit channel options, lock TV use by channel, set Energy Mode, set the auto-on TV Timer, set 3D options.
5. TV Menus AV Menu An on-screen slider displays when making some audio and video adjustments. Numeric values represented on the slider range from 0 (minimum) to 63 (maximum), with 31 as the mid-point. The AV menu contains sub-menus for audio and video adjustments AV Menu Options Video See the description of video adjustments on page 42. Audio See the description of audio adjustments on page 44.
5. TV Menus 41 AV Menu, continued AV > Global menu AV Menu Options Video Mute On, Off • Global • Audio Only Screensaver On, Off • • On: Displays a solid blue background when there is no video signal from the current input. Use the On setting to let the colored screen remind you that the TV is powered on at times when there is no picture. The TV will power off after five minutes if it detects no video signal. Off.
5. TV Menus Video Menu Mitsubishi recommends you assign names to TV inputs before making video adjustments (use the Inputs > Name menu). Otherwise, adjustments will be reset to the defaults if you name inputs afterwards. To make video adjustments: • From the Video menu: 1. Press to highlight an option. 2. Press to display the submenu and adjust. 3. Press MENU to return to the AV menu. • While watching TV: Press the VIDEO key repeatedly to display the video option you want to change.
5. TV Menus 43 Video Menu, continued Video Menu Options SharpEdge On, Off SharpEdge™ adds special edge enhancements to make the image appear sharper. Saved by input. Deep Field Imager On DeepField™ Imager dynamically enhances black levels in portions of the screen to provide strong contrast with detail over mixed screen content. Off Contrast is adjusted uniformly across the entire screen. Demo For comparison, displays a split picture to show On (right side) and Off (left side).
5. TV Menus Audio Menu To make audio adjustments: • From the Audio menu: to highlight an option 1. Press 2. Press to display the submenu and adjust. 3. Press MENU to return to the AV menu. • While watching TV: Press the AUDIO key repeatedly to display the audio option you want to change. Press to change settings. AV menu, Audio options Audio Menu Options Speakers The Speakers option displays only if an A/V receiver connection has been detected.
5. TV Menus 45 Captions Menu Captions on Digital Channels Captions on Analog Channels The TV can decode captions from ANT 1/ANT 2 and the VIDEO composite and S-VIDEO jacks. Broadcasters can send either standard closed captions or text service. Standard closed captions follow the dialogue of the program and display in a small section of the screen. Text-service closed captions often contain information such as weather or news and cover a large portion of the screen.
5. TV Menus Setup Menu Use the Setup menu to: • Select English or Spanish for menus and on-screen text. • • • • • • Scan the channels available for the antenna or cable service connected to the ANT 1 or ANT 2 jacks. Edit channel options, including channel locking. Set the TV’s internal clock. Set the TV Timer to turn on the TV automatically at a designated time. Set the energy mode for power consumption when the TV is powered off. Control 3D mode.
5. TV Menus 47 Setup Menu, continued Edit Virtual Channel Number (digital channels only). A channel number sent by a local broadcaster. Usually the virtual number is associated with the corresponding analog channel number. For example, a broadcaster may associate digital channel 2-1 with their analog channel 2. Physical Digital Channel Number. The channel number officially assigned to the actual broadcast frequency; shown on screen in parentheses.
5. TV Menus Setup Menu, continued Clock Set the clock if you wish to: • Use the TV’s Timer function. • Maintain accurate ChannelView listings. Use either the manual or auto method to set the clock. Setup menu, Timer and Clock options Setup Menu Options Settings Timer Clock Manual. To set the clock manually: 1. Select Manual. 2. Set the time of day. 3. Set the date. 4. Select your time zone. 5. Select either Applies or Ignore for Daylight Savings Time.
5. TV Menus 49 Setup Menu, continued Timer Use the Timer to set a time for the TV to turn on automatically. Use this menu to set a day, time, input, and channel for the Timer. If the TV is already on at the requested time, the TV will automatically tune to the designated channel. • • • • • The TV clock must be set before you can use the Timer feature. TV Energy Mode must be set to Fast Power On to have the TV power on at the set time.
5. TV Menus Setup Menu, continued Setup menu, 3D options Setup Menu Options Energy Mode Energy Fast Power On Low Power Use the Energy Mode option to select the level of power consumption while the TV is turned off. The default setting is Fast Power On. Low Power uses less energy, but TV power-on takes longer and some TV features may be unavailable. Keep Energy Mode set to Fast Power On if you need to: • Have faster power on. • Receive updates to ChannelView channel listings.
5. TV Menus 51 Inputs Menu Inputs Menu Options Name Cable Box, Camcorder, CD/ Audio, DVD (DVD, DVD2, Blu-Ray), DVR, Game (Game, PS, Xbox, Wii), MP3 Player, PC, Satellite, VCR, AVR On/Off (ANT 1 and ANT 2 only) Delete (deactivated HDMI only) Control On, Control Off (CECenabled HDMI devices; operates only when Inputs > NetCommand HDMI Control is set to On) • • • • Lets you assign or change names of inputs appearing in the Input Selection menu. - Press to move between inputs. - Press to select a name.
5. TV Menus Lock Menu TV locks available from the Lock menu are: Parent Lock by Ratings Restricts access to programming based on V-Chip rating signals sent by the broadcaster. Other Time Control Panel Note: Lock by Time Restricts TV use by time of day. Lock Control Panel Disables the touch keys on the TV’s control panel. Use this option if small children in the home try to press control-panel touch keys. Channel Lock is an additional lock that blocks access to specific channels.
5. TV Menus Lock Menu, continued Parent Menu Options (U.S.-based rating system) Option Name and Description Lock Off, On Disables or enables program blocking based on V-Chip signals and the U.S. rating system. TV Rating TV-Y Youth. For children under 7. TV-Y7 Youth 7 and older. TV-G General Audience. For the entire family. TV-PG Parental Guidance. Parental Guidance recommended; may not be suitable for some children. TV-14 Adolescent 14 and older. Not recommended for children under 14.
5. TV Menus Lock Menu, continued Other Menu Options (alternate rating system) This TV can recognize new rating systems that may come into effect in the future. The Other option remains grayed out until the TV receives a signal using an alternate rating system. Such alternate rating systems will apply only to digital programming received on the ANT 1 and ANT 2 inputs. Option Name and Description Lock On, Off Enable or disable program blocking.
6 NetCommand IR Control About NetCommand IR Control Note: • • • • • To learn about NetCommand for HDMI devices, see Appendix D and “About Home-Theater Control Systems,” page 19. NetCommand setup is optional. You may wish to use NetCommand IR control to supplement CEC control. You can perform NetCommand setup when the TV first recognizes a device during Auto Input Sensing or at any convenient time afterward.
6. NetCommand IR Control IR Emitter Placement VIDEO L - AUDIO - R INPUT 3 INPUT 2 R R DVI/PC INPUT L - AUDIO - R L AVR AUDIO OUTPUT L R IR NetCommand OUTPUT/ EXTERNAL CONTROLLER INPUT S-VIDEO DIGITAL AUDIO OUTPUT (INPUT 3) 3D GLASSES EMITTER VIDEO: 480i/480p/720p/1080i/1080p AUDIO: PCM STEREO PC: VGA, W-VGA, SVGA, W-SVGA, XGA, W-XGA, SXGA, 720p, 1080p 1. Pr A/V Receiver Pb 2. TV Main Panel Pr Pb L YPbPr(480i/480p/720p/1080i) 3.
6. NetCommand IR Control 57 Initial NetCommand Setup for Most Devices To perform this procedure, you need: • The remote controls for both the TV and the device you want to control. • The IR emitter cable supplied with the TV. Note: 1. 2. 3. To set up an A/V receiver, see “Setting Up NetCommand IR Control of an A/V Receiver,” page 61. Connect and position the IR emitters for the devices you wish to control. See “IR Emitter Placement” on the opposite page.
6. NetCommand IR Control NetCommand Specialized Device Keys Refer to this chart when “learning” device keys. “Learn” some, all, or none of the keys used for each device type. The chart has space for you to write in functions you assign to the F1–F4 keys. See the following page for more on keys marked in the “Special Operation Method” column.
6. NetCommand IR Control 59 Operating NetCommand-Controlled Devices Controlling Most Device Types Controlling an A/V Receiver As an example of NetCommand control, if you are watching your cable box and you wish to tune to the next channel higher, press CH/PAGE . NetCommand then sends the “learned” channel-up control signal to the cable box. See page 61 to set up control of an A/V receiver. 1. With an IR emitter properly positioned in front of the 2. 3. 4.
6. NetCommand IR Control Operating NetCommand-Controlled Devices, continued Key Name in Learning Screen Guide Special Operation Description and Setup How to Use Displaying the Disc Menu (DVD or high-definition disc format) While watching the device, press GUIDE to display the disc menu. “Learn” the DISC MENU, TOP MENU, or other key as named on the original remote in the Guide learning position. Displaying the On-Screen Program Guide (cable box or satellite receiver) 1.
6. NetCommand IR Control Setting Up NetCommand IR Control of an A/V Receiver Several types of A/V receiver control can be set up using the Inputs > AV Receiver menu, shown on the following pages. • Controlling power and volume is described on this page. • Automatic audio switching, suitable for most equipment setups, is described under “A/V Receiver Control: Automatic Audio Switching (non-HDMI A/V receiver)” on the next page.
6. NetCommand IR Control Setting Up NetCommand IR Control of an A/V Receiver, continued A/V Receiver Control: Automatic Audio Switching (non-HDMI A/V receiver) Perform one of these setups to enable the A/V receiver to switch automatically to the correct audio input when you select a device in the TV’s Input Selection menu. To set up control of an A/V receiver you need: • The remote controls for both the TV and the A/V receiver. • The IR emitter cable supplied with the TV. • Connecting cables ment.
6. NetCommand IR Control 63 Setting Up NetCommand IR Control of an A/V Receiver, continued Before You Begin ceiver menu are arbitrary names used by the TV to uniquely identify A/V receiver inputs. 1. Connect your A/V devices to the TV and connect 2. 3. your A/V receiver to the audio outputs on the TV and the DVD player. See chapter 3, “TV Connections,” for suggestions. Important: To use Setup 1, you must: • Connect the A/V receiver to the TV’s audio output; i.e.
6. NetCommand IR Control Setting Up NetCommand IR Control of an A/V Receiver, continued Audio Switching Setup 2: Automatic A/V Receiver Switching to a Surround Sound Device A/V Receiver Control: Automatic Audio and Video Switching via HDMI Use this setup to send digital surround sound directly from a device to an A/V receiver. 1. Under Learn, highlight Input2. In this example, the IR code for the A/V receiver’s DVD Audio input will be “learned” as Input2. 2. Press ENTER on the TV’s remote control.
6. NetCommand IR Control 65 Setting Up NetCommand IR Control of an A/V Receiver, continued VCR 4. Power on the A/V receiver. 5. Set the TV’s remote control slide switch to the TV Cable box 6. DVD player High-definition DVD player position and power on the TV if needed. When the Auto Input Sensing screen displays, select device name AVR. Setup to Control A/V Receiver Power and Volume Perform the steps under “A/V Receiver Control: Power and Volume,” page 61.
6. NetCommand IR Control Setting Up NetCommand Control of an A/V Receiver, continued 8. Press EXIT if finished or repeat these steps for additional video sources connected to the A/V receiver. NetCommand IR Control: Device Connected to an A/V Receiver 3. Press ENTER and the highlighted Input label will start 4. 5. flashing to indicate readiness for “learning.
Appendices Appendix A: Appendix B: Appendix C: Appendix D: Appendix E: Specifications . . . . . . . . . . . . . . . . . . . Bypassing the Parental Lock . . . . . . . . . . Programming the Remote Control . . . . . . . NetCommand HDMI Control of CEC Devices . Troubleshooting . . . . . . . . . . . . . . . . . . Downloaded From TV-Manual.com Manuals . . . . . . . . . . . . . . . . . . . .
Appendices Appendix A: Specifications Size, Weight, and Power Consumption Dimensions (inches) Model Height L65-A90 39.8 Width 57.7 Depth 10.05 Outputs Weight (lbs.) Power (watts) 141.5 180 Description Qty. Audio Speakers 2 Qty.
Appendices 69 Appendix B: Bypassing the Parental Lock Bypassing the Parental Lock Lock Bypass Instructions Have Been Filed for Future Reference After you set the lock, you must use your pass code to view a locked program, view the locked TV, view a locked channel, cancel the lock, or enter the Lock menus. IMPORTANT Cut along the dotted line and file bypass instructions in a safe place for future reference. Downloaded From TV-Manual.
Appendices This page intentionally left blank Downloaded From TV-Manual.
Appendices Appendix C: Programming the Remote Control This appendix explains programming the TV’s remote control to operate other A/V devices. This is distinct from NetCommand control. The TV’s remote control can operate other devices by three different methods: VCRs and DVRs • Remote Control Programming: You must move the slide switch to the position specific to the type of device. • • • • • • • NetCommand® IR “learning”: You can operate other devices with the slide switch in the TV position.
Appendices Appendix C: Programming the Remote Control, continued Programming the Remote Control 6. Once you have found the correct code, write it in the space below for future reference. 1. Move the slide switch at the top of the remote to the position for the product you want to control. Refer to the table below. Only one of each device type can be controlled in each slide-switch position.
Appendices Appendix C: Programming the Remote Control, continued Programming Codes Audio Amplifiers Make Code Acurus Adcom Altec Lansing Aragon Bel Canto Design Bose Carver Cary Audio Design Classe Curtis Mathes Durabrand Flextronics GE Halcro Harman/ Kardon JVC Klipsch Krell Left Coast Lenoxx Lexicon Marantz Mark Levinson McIntosh Modulaire Mondial Optimus 30765 31100, 30577 31742 30765 31583 Parasound Philips Pioneer Polk Audio Primare RadioShack RCA Realistic Soundesign Technics Victor Wards Ya
Appendices Appendix C: Programming the Remote Control, continued Programming Codes, continued CD Players Make Code A/V Receivers Make Code A/V Receivers Make Code Satellite Receivers Make Code SAE Sansui Sanyo Sears Sharp Sherwood Sonic Frontiers Sony Amplifier Technologies Anam Apex Digital Arcam Atlantic Technology Audiophase Audiotronic Audiovox B&K Nakamichi Onkyo AlphaStar Bell ExpressVu Chaparral Crossdigital DirecTV 30157 30157, 30000 30179, 30087, 30000 30179 30180, 30037 31950, 30180 3
Appendices Appendix C: Programming the Remote Control, continued Programming Codes, continued Satellite Receivers Make Code VCRs Make Uniden Zenith DirecTV Dual Durabrand Dynatech Electrohome VCRs Make A-Mark ABS Accurian Admiral Adventura Adyson Aiko Aiwa Akai Alba Alienware Allegro America Action American High Amstrad Asha Astra Audiovox Avis Beaumark Bell & Howell 10724, 10722 11856, 11810, 10856 Code 20278, 20240, 20046, 20037, 20000 21972 20000 20479, 20209, 20104, 20060, 20048, 20047, 2003
Appendices Appendix C: Programming the Remote Control, continued Programming Codes, continued VCRs Make Sanyo Code 20479, 20240, 20159, 20104, 20047, 20046, 20000 Scott 20184, 20121, 20045, 20043 Sears 20209, 20162, 20104, 20072, 20067, 20060, 20048, 20047, 20046, 20045, 20043, 20042, 20041, 20039, 20037, 20035, 20033, 20000 Sharp 20848, 20048, 20047, 20032, 20000 Shintom 20240, 20072, 20039, 20000 Shogun 20240 Siemens 20037, 20104 Signature 20479, 20060, 20048, 20046, 20037, 20035, 20000 Singer 2024
Appendices Appendix C: Programming the Remote Control, continued Programming Codes, continued DVD Players Make Code DVD Players Make Code DVD Players Make Code DVD Players Make Code Polk Audio Portland Presidian Proceed Proscan Prosonic ProVision Qwestar Radionette RadioShack RCA Samsung Sony Tredex Unimax United Universum Urban Concepts US Logic V Venturer Vizio Vocopro Wesder Xbox Yamaha Realistic Reoc Revoy Rio RJTech Rotel Rowa Saba Sampo 20539 20770 21072, 20675 20672 20522 20699 20778 20
Appendices Appendix D: NetCommand HDMI Control of CEC Devices Many new HDMI devices have a feature called CEC (Consumer Electronics Control) or HDMI Control. Mitsubishi calls this feature NetCommand HDMI Control or NetCommand for HDMI. HDMI CEC allows one device, such as the TV, to control other devices, such as an A/V receiver or disc player. CEC use is optional.
Appendices 79 Appendix D: NetCommand HDMI Control of CEC Devices, continued • Figure 3 (“power on the device”). One of these conditions applies: - - - The TV’s NetCommand HDMI Control is turned on, but HDMI control is turned off in the menu of the new device. Action: Enable the device’s CEC capabilities in the device’s setup menus. Within a few minutes you may see the screen in figure 2. The device has not yet been detected (e.g., no power). Action: Power on the device.
Appendices TV main panel Resolving CEC Conflicts, Changing HDMI Connections, Removing HDMI Devices VCR DVD player HDMI Cable HDMI Cable ANT-2/AUX ANT-1/MAIN A/V receiver with HDMI output HDMI OUT VIDEO Y Y/VIDEO INPUT 1 R R DVI/PC INPUT L - AUDIO - R L DIGITAL AUDIO OUTPUT INPUT 2 Pr L - AUDIO - R INPUT 3 Pb Pb Pr L YPbPr(480i/480p/720p/1080i) Because each manufacturer selects which CEC functions to support, some devices can conflict with other devices.
Appendices Resetting HDMI Control or Removing an HDMI Device (Figure 6) 1. Power off the device. 2. Disconnect the HDMI cable. 3. Press MENU on the TV remote control to enter the TV Main menu. 4. Select the Inputs menu using the keys. 5. Select the Inputs > Name menu using the key. 6. Highlight the device to reset using the key and 7. then the key. With the device highlighted, select Delete to reset HDMI Control. Press EXIT to clear the menus. 8. 9.
Appendices Appendix E: Troubleshooting TV Reset Comparison Guide You can resolve many common TV problems using the reset functions described in the following table. See also the troubleshooting suggestions later in this appendix. IMPORTANT Before you change sound or picture settings: If picture or sound settings seem wrong for a broadcast channel (a channel from ANT 1, ANT 2, a cable box, or satellite receiver), first check other channels from the same input before changing settings.
Appendices 83 Appendix E: Troubleshooting, continued Reset Name When to Use How to Use Resulting Action Control-Panel Lock Release To re-enable the control-panel touch keys after activation of the Control-Panel Lock Press and hold the MENU touch key on the control panel for over eight seconds. This works even if the TV is powered off. Allows the control panel to be unlocked if the remote control is misplaced.
Appendices Appendix E: Troubleshooting, continued General TV Operation Symptom Remarks 1. The TV remote control does not work. • • • • • • 2. When I try to use the remote control, the POWER key blinks five times. Replace the batteries. 3. TV does not respond to the remote control or to control-panel touch keys and TV will not power on or off. • • Unplug the AC power cord for 10 seconds. Use the System Reset button. 4.
Appendices 85 Appendix E: Troubleshooting, continued TV Channels Symptom Remarks 1. The TV takes several seconds to respond to channel changes. • • • • It is normal for digital channels to take longer to tune in. Press ENTER after a entering channel number to avoid delays. Use a 4-digit number for an over-the-air digital channel. Use a 6-digit number for digital cable channels if your cable service is able to recognize 6-digit channel numbers. 2. You cannot access a channel.
Appendices Appendix E: Troubleshooting, continued Picture Symptom Remarks 1. Picture does not look like a high-definition picture. Not all signals are high-definition signals. To receive high-definition programming from your cable or satellite provider, you must subscribe to the provider’s high-definition service. Some overthe-air broadcasts are in high-definition and can be received with a high-quality antenna suited to your location. 2. There is a large black or gray rectangle on the screen.
Appendices 87 Appendix E: Troubleshooting, continued Sound (see also NetCommand troubleshooting for additional help with A/V receiver concerns) Symptom 5. Remarks Cannot select an audio-only device; it does Insert a video plug into any composite VIDEO jack for the Auto Input not appear in the Input Selection Menu. Sensing screen to appear. See “Audio-Only Device,” page 27. NetCommand IR Control Symptom Remarks 1.
Appendices Appendix E: Troubleshooting, continued NetCommand IR Control Symptom Remarks 5. There is no sound or picture from the A/V receiver for my DVD player or other device connected to the A/V receiver; the A/V receiver should be sending video to the TV over an HDMI cable. (A/V Receiver Set Up for Audio and Video Switching over HDMI) NetCommand A/V receiver setup is not switching audio and video inputs properly. See “Setup to Control Automatic Audio and Video Switching via HDMI,” page 65. 6.
Appendices 89 Mitsubishi TV Software END-USER LICENSE AGREEMENT FOR EMBEDDED SOFTWARE IMPORTANT – READ CAREFULLY: This License Agreement is a legal agreement between you (either an individual or an entity) and Mitsubishi Digital Electronics America, Inc. (MDEA) for all software pre installed and/or provided along with this television (“Software”). By utilizing this television and Software, you agree to be bound by the terms of this License Agreement.
Warranty Mitsubishi LaserVue™ Television Limited Warranty MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants as follows to the original purchaser of this television from an authorized MITSUBISHI Audio/Video Dealer, should it prove defective by reason of against defects arising from improper workmanship and/or material: a. Parts.
Warranty 91 c. Proof of purchase date from an authorized MITSUBISHI dealer is required when requesting warranty service. Present your sales receipt or other document which establishes proof and date of purchase. THE RETURN OF THE OWNER REGISTRATION CARD IS NOT A CONDITION OF COVERAGE UNDER THIS LIMITED WARRANTY. However, please return the Owner Registration Card so that we can contact you should a question of safety arise which could affect you. 2. THIS LIMITED WARRANTY DOES NOT COVER: a. Up to .
Index Index A Adjust Keys (Up/Down/Left/Right) 31, 39 Anamorphic Picture Format 35 Antenna Connecting 25 Signal Strength for Digital Channels 33 Antenna Inputs (ANT 1, ANT 2) 12 Audio Lock (A/V receiver control) 72 Audio Output Jacks 13 Auto Input Sensing 16 Auto-Off (Sleep Timer) 30 Auto-On (Timer) 49 A/V Memory Reset 82 A/V Receiver and TV Speakers 44 and TV’s Remote Control 61, 65, 71 Audio Lock 72 Connecting 13, 28 Controlling Sound Volume 18 Disconnecting Analog 18 NetCommand IR Control 55, 59, 61
Index Lock TV Bypassing the Lock 69 Lock by Channel 47 Lock by Ratings 53 Lock by Time 54 Lock Control Panel 54 Preset V-Chip Blocking 52 Low Power (Energy Mode) 50 Wired IR option 13 M Main Panel (on back of TV) 12, 13 Media Setup Menu 37 Memorizing Channels 16, 46 Memory Reset, A/V 82 Moving the TV 7 Mute Closed Captions 45 MUTE key 31 Video Mute 41 N Name (Inputs > Name menu) 51 NetCommand for HDMI Devices 10, 71, 78, 81 NetCommand IR Control About 55 A/V Receiver Control 61 Compared to Programming the
Website: www.mitsubishi-tv.com E-mail: MDEAservice@mdea.com For questions, call Consumer Relations at 800-332-2119 To order replacement or additional remote controls or Owner’s Guides Visit our website www.mitsuparts.com or call 800-553-7278 SYSTEM RESET If the TV does not respond to the remote control, control-panel touch keys, or will not power on/off, press the SYSTEM RESET button on the control panel. The blue LED will flash quickly for about one minute.
Downloaded From TV-Manual.
For information on System Reset, please see inside back cover. Guidelines for setting up and using your widescreen TV start on page 14. © 2008 Mitsubishi Digital Electronics America, Inc. 853B620A10 Downloaded From TV-Manual.