User`s guide

168 Quadro Workstation User’s Guide
Chapter 9
Using NVIDIA Scalable Link Interface (SLI)
Installation and Operating Instructions
Before removing current graphics boards and installing two NVIDIA Quadro FX
boards, please uninstall any current drivers and save on your Windows desktop the
provided SLI drivers.
Installing the Hardware
Note: Perform the installation in a static safe environment and utilize a properly
grounded anti-static wristband. Place any static sensitive components in anti-
static bags.
1 Power off the system and remove the power cord from the power supply.
2 Gently remove or open the system enclosure.
Refer to owners manual that came with your computer.
3 Remove any non-SLI capable graphics boards that may occupy the x16 expansion
slot and replace it with your SLI-capable graphics board.
4 Install the second SLI-capable graphics board in the adjacent slot.
You may also need to relocate a card. The chosen slot must be x16, x8 or x4
capable.
5 Connect the two graphics boards with the SLI bridge connector.
The SLI connector is required only for SLI Frame Rendering.
QuadroGuide_.book Page 168 Monday, November 14, 2005 2:05 PM