MHK2 Install Manual

Performing a System Test

You can test the system setup in ADVANCED MENU

under SYSTEM TEST option.

1 Press and hold Menu on the controller for 5

seconds to access ADVANCED MENU options.

2 Touch

or to go to SYSTEM TEST.

3 Touch Select or touch text area.

4 Touch

or to select system test type. Touch

Select or the touch text area.

5 For the Heat Test and Cool Test use

or to activate equipment.

Note: The clock is used as a timer while

Heat or Cool is running. The Heat and Cool

indicators are displayed when the system test

is running.

kumo cloud

Connecting to the kumo cloud

: The Wireless Interface 2 or later must be installed and

configured with the kumo cloud app before continuing with the startup of the MHK2.

Automatic Setting of Time Provided by the Wireless

Interface

When a Wireless Interface is present, the MHK2 Controller will operate using the time and date the

Wireless Interface receives from the Internet. In the event of a system power outage, the MHK2

Controller’s time and date setting will be independent until such time as the Wireless Interface

regains an Internet connection. At that point, the MHK2 Controller will again match the Wireless

Interface’s Internet-acquired time and date.

33-00446EFS_B.indd 13 10/17/2019 3:09:01 PM