Operation Manual

18-
Tools
Currency converter
This feature allows currency conversion. The currencies and exchange rates must be entered
prior to use. The conversion is calculated on the per unit exchange rate of the second selected
currency.
To select the currencies and the exchange rate
To calculate the conversion between the selected currencies
Alarm clocks
This feature allows you to set up to three alarm clocks. These alarms can be set to be played
at different times and to be played once, daily, or on selected days.
To set alarms
If the phone is off at alarm time, it automatically switches on.
If the phone is locked or if the PIN setting is on, the phone returns to this locked state after the
alarm has rung until you use it again.
If the alarm is acknowledged but not validated after the 3rd (and final) alarm, the alarm indica-
tors remain on the display for up to 15 minutes (the mobile then either goes back its previous
state, 'on' or 'off').
To use the alarm as a Reminder or a Snooze Alarm
To turn the alarm Off
1
Press the [Menu/T9] key. Select Tools.
2 Select Currency converter.
3 Select Settings.
4 Enter the first currency name (e.g. Euro). Press OK.
Enter the second currency name (e.g. Dollar). Press OK.
Enter the exchange rate using to enter a decimal point.
5 Press OK to validate the entry. Press Save to confirm data storage.
1
Press the [Menu/T9] key. Select Tools.
2 Select Currency converter.
3 Select one of the first two options.
4 Enter the amount to be converted. Press to insert a decimal point if needed.
5 Press OK. The converted amount and the exchange rate information are displayed.
1
Press the [Menu/T9] key. Select Tools.
2 Select Alarm clocks.
3 Select Alarm 1, Alarm 2 or Alarm 3. Select On then enter the alarm time or press OK to val-
idate the displayed time.
Select Repetition (1, 2 or 3 according to the Alarm you have previously set). Select Once
(the alarm will be played once only), Daily (the alarm will be played every day at the same
time) or Weekdays to choose the required day(s) by pressing OK, then select Valid to return
to the Alarm clocks screen. Press Save to confirm the selection.
is displayed when reverting to the standby display.
1. If a call is in progress at alarm time a 'Call in progress' alert beep sounds and a visual alert is displayed
every 3 minutes. Validate or acknowledge the alarm in the usual way.
2. If several alarms are set to be played at the same time, the alarm tone is played once only. Any action performed
on the mobile to acknowledge the alarm tone is then applied to all the alarms.
1 Press No ring, or any other key (except Valid. and OK) to snooze the alarm. The alarm icon
remains on the display and the alarm starts ringing again 3 minutes later.
Or press Valid or OK to acknowledge the alarm and stop the alarm clock process.
1
Press the [Menu/T9] key. Select Tools.
2 Select Alarm clocks.
3 Select Off. Press Save to confirm the selection.