Operation Manual

29-
Messages/Text editing
Broadcast - cell broadcast (CB) messages
These messages are broadcast by the networks to GSM users and may provide general infor-
mation about local area dialling codes, weather reports, traffic, news, etc. Each type of mes-
sage is numbered, allowing you to select the type of information you wish to receive.
Up to 5 types of messages can be programmed into the selection list.
16 standard message types are pre-programmed into the phone for your selection. New message
types can be programmed into the selection list using the 3 digit cell broadcast type number. Con-
tact your service provider for details about the type of messages they broadcast.
Before you activate the broadcast message service, you must enter at least one message type
in the selection list.
Entering a message type in the selection list
Activating / deactivating the broadcast service
Reading broadcast messages
Broadcast messages are displayed whilst the phone is on standby. If a broadcast message is received
whilst in conversation or operating the menu, it only becomes visible once the mobile reverts to the
standby display. A message can contain up to 93 characters and may be displayed on several pages.
Options on message display
Press the [Clear] key to clear the CB message displayed. Press the [Call] key to dial the
number contained in the message.
Press Options to display the following menu:
Activating/deactivating the alert tone
An alert tone can be set to beep every time a new or updated broadcast message is received.
Broadcast language
All the broadcast messages can be displayed in several languages.
To select a language:
1 Press the [Menu/T9] key. Select Messages.
2 Select Broadcast.
3 Select Message types and select one of the empty types ([...]). Select OK.
4 Select Modify by list (or Modify by code if the type number is known).
5 Select the message type(s) you wish to receive and select Valid.
6 Select Save to store your setting.
1 Press the [Menu/T9] key. Select Messages.
2 Select Broadcast.
3 Select Reception and select On or Off.
4 Select Save to store your setting.
OPTION ACTION
Delete To delete the current message
Delete All To delete all the received CB messages
Numbers &
addresses
To display all phone numbers contained in the message text and dial or store
them in the Phone book if required.
Broadcast Off To deactivate cell broadcast.
1 Press the [Menu/T9] key. Select Messages.
2 Select Broadcast.
3 Select Reception alert and select On or Off.
4 Select Save to store your setting.
1 Press the [Menu/T9] key. Select Messages.
2 Select Broadcast.
3 Select Language and select one of the available languages.
4 Select Save to store your setting.
The availability of this feature is network dependent.