Operation Manual

93-
Settings
Your SIM card may contain a forbidden list of networks which cannot be used. To view this or
show your home network:
Selecting manual search
You may need to select a specific network (e.g. better coverage than your own in the current
location).
Selecting automatic search
To perform an automatic search from the preferred list, proceed as follows:
Call barring
This network dependent service forbids certain outgoing or incoming call types. It requires a
call barring password.
To bar a call
To remove call barring or check its status
1
Press the [Menu/T9] key. Select Settings.
2 Select GSM Services.
3 Select Network.
4 Select either Forbidden to view the list of forbidden networks, or select Home network to
view the name of your usual network.
1
Press the [Menu/T9] key. Select Settings.
2 Select GSM Services.
3 Select Network.
4 Select Search.
5 Select Manual. The Scanning for networks... message is displayed.
6 Use the [Up] or [Down] arrow keys to select a network from the list.
7 Press OK to confirm your choice.
The Requesting... message is displayed, after which the phone will return to the standby
display.
1. You cannot select a network for manual change if it is on the forbidden list (even if it is still listed as a choice).
2. You cannot delete a network from the forbidden list. This list is automatically updated when the manual network
selection is performed.
3. If the Manual search has been selected before turning the mobile off and if the manually selected network
cannot be found when the mobile is next turned on, you must select another network manually for your mobile
to lock on.
1
Press the [Menu/T9] key. Select Settings.
2 Select GSM Services.
3 Select Network.
4 Select Search.
5 Select Automatic.
1
Press the [Menu/T9] key. Select Settings.
2 Select GSM Services.
3 Select Call barring.
4 Select Outgoing calls (to bar All outgoing calls, International calls or International calls
excluding your Home network), Incoming calls (to bar All incoming calls or all incoming calls
while Roaming only), Cancel all (to cancel all barring conditions) or Change password.
5 Select Activate. Enter the password and press OK.
The network then confirms the selection.
1
Press the [Menu/T9] key. Select Settings.
2 Select GSM Services.
3 Select Call barring.
4 Scroll up or down to select the barring type to be deactivated (Cancel) or checked and follow
the instructions displayed.