MHK2 Product Manual

10
Scheduling Options
This controller may be configured to be programmable or non programmable for Residential and
Commercial modes. Both options are explained below.
Controller schedule is an optional menu item. It will only show up in the controller menu if enabled by
your heating or cooling professional.
Residential Program Default Settings
Each day can be programmed for different heating and cooling settings in 4 unique periods (Wake,
Leave, Return, Sleep) in the controller MENU/SCHEDULE. Make sure that controller schedule is
enabled by your heating or cooling professional in the controller Installer Setup menu.
See table below for the default schedule with adjustable settings:
Controller schedule is turned ON
Period Start Time
Heat (Mon-Fri) Cool (Mon-Fri) Heat (Sat-Sun) Cool (Sat-Sun)
Wake
6:00 a.m. 69 ° 79 ° 69 ° 79 °
Leave
8:00 a.m. 61 ° 86 ° 61 ° 86 °
Return
6:00 p.m. 69 ° 79 ° 69 ° 79 °
Sleep
10:00 p.m. 61 ° 83 ° 61 ° 83 °
Back
Sched.
On/Off
Sched.
On/Off
AM
Heat
Fan
Auto
Mode
Auto
Wake LeaveReturn Sleep
Following Schedule
VaneVane ModeMode
MenuMenu Fa nFan
• Wake, Leave, Return, Sleep periods appear on the controller home screen.
• Temperature settings for all four periods, different per days or group of days, are adjustable in
controller MENU/SCHEDULE.
Schedule Period
An active period is shown underlined on the controller home
screen. Periods shown vary on whether the local controller
schedule is enabled and turned On.
1 Controller schedule is turned OFF: Schedule periods
are not displayed.
2 Controller schedule is turned ON: Wake, Leave, Return,
Sleep periods are displayed.
Heat
Auto
Vane
Leave
Return
Heat
Auto
Vane
Leave
Return
Heat
Auto
Vane
Leave
Return
Heat
Auto
Vane
Leave
Return
33-00447EFS_B.indd 10 10/17/2019 3:22:54 PM