User`s manual

180
6.2 Switch Setting
Specify settings to be used for each channel.
(1) Setting method
Open "Switch Setting".
Project window [Intelligent Function Module] Module name [Switch Setting]
Item Description Setting value
Comparison output setting value
Set the comparison output function. This is
the same for each channel.
• 0: Coincidence Output
• 1: Cam Switch Function
Coincidence output 1 channel
assignment setting
Set the channel to be compared.
• 0: CH1
• 1: CH2
•••
Coincidence output 8 channel
assignment setting
Operation mode setting Set the operation mode for each channel.
• 0: Normal Mode
• 1: Frequency Measurement Mode
• 2: Rotation Speed Measurement Mode
• 3: Pulse Measurement Mode
• 4: PWM Output Mode
Count source selection Set the count source for each channel
• 0: A Phase/B Phase
• 1: Internal Clock (0.1µs)
• 2: Internal Clock (1µs)
• 3: Internal Clock (10µs)
• 4: Internal Clock (100µs)
• 5: Coincidence Output 1
• 6: Coincidence Output 2