User`s manual

202
• program for the sampling counter function
• program for the periodic pulse counter function
(d) Program for the comparison output function
• program for the coincidence output function
• program for the cam switch function
(e) Program for overflow/underflow detection processing
(f) Program for an error/warning reset
Turn on CH1 Selected counter function
start command.
Turn on CH1 Selected counter function
start command.
Turn on Reset command (coincidence
output 1).
Turn off Reset command (coincidence
output 1).
Turn on CH1 Cam switch function/
PWM output start command.
Turn on CH1 Coincidence output
enable command.