User`s manual

208
(b) Common program
(c) Counter function program
• program for the preset/replace function
• program for the latch counter function by latch counter input terminal
• program for the latch counter function by counter function selection
• program for the count disable function
• program for the sampling counter function
Turn on CH1 Count enable command.
Turn off CH1 Count enable command.
CH1 Present value is stored.
Turn on CH1 Preset/replace
command.
CH1 Latch count value (latch counter
input terminal) is stored.
CH1 Latch count value update flag
reset command (latch counter input
terminal): Reset (1
H)
CH1 Latch count value is stored.
CH1 Latch count value update flag
reset command: Reset (1
H)
Turn on CH1 Selected counter
function start command.
Turn on CH1 Selected counter function
start command.
Turn off CH1 Selected counter function
start command.
Turn on CH1 Selected counter
function start command.
CH1 Sampling count value is stored.
CH1 Sampling count value update
flag reset command: Reset (1
H)