User`s manual

211
CHAPTER 7 PROGRAMMING
7
7.1 Using the Module in a Standard System Configuration 7.1.2 Program example when the parameters of the intelligent function module are not used
(4) Program example of the rotation speed measurement mode
CH1 Moving average count (rotation
speed measurement): three times
Turn on CH1 Count enable command.
CH1 number of pulses per rotation
: 1000
Turn off CH1 Count enable command.
CH1 Measured rotation speed value
is stored.
CH1 Measured rotation speed value
update flag reset command
: Reset (1
H)
CH1 Time unit setting (rotation speed
measurement): 0.01s