User`s manual

CHAPTER 2 SYSTEM CONFIGURATION

This chapter explains the QD65PD2 system configuration.

2.1 Applicable Systems

This section describes the applicable systems.

(1) Applicable modules and base units, and number of modules

For the applicable CPU modules and base units, and the number of mountable modules, refer to the user’s

manual for the CPU module used.

Note the following when mounting modules with the CPU module.

• The power supply capacity may become insufficient depending on the combination with other modules or the

number of mounted modules.

Select the power supply capacity according to the modules to be used.

If the power supply capacity is insufficient, change the combination of the modules.

• Mount the modules within the number of I/O points range of the CPU module.

Modules can be mounted on any slot within the number of available slots.

(a) When mounted to a MELSECNET/H remote I/O station

For an applicable MELSECNET/H remote I/O station and base units, and the number of mountable modules,

refer to the Q Corresponding MELSECNET/H Network System Reference Manual (Remote I/O network).