User`s manual

225
CHAPTER 7 PROGRAMMING
7
7.2 When Using the QD65PD2 in a MELSECNET/H Remote I/O net 7.2.1 Program example when the parameters of the intelligent function module are used
*1 Stores the error code of the error in process.
*2 Stores the latest error, and hold it also after an error reset.
*3 Stores the warning code of the warning in process.
*4 Stores the latest warning, and hold it also after an error reset.
(2) Parameter setting and auto refresh setting
For parameter setting and auto refresh setting, refer to the procedure in Page 216, Section 7.2 (6).
M492, M493
Stores that the Z(P).REMTO instruction is complete or the result of the instructionM512, M513
M550, M551
SB20 Network module status
SB47 Baton pass status (own station)
SB49 Data link status (own station)
SW70 Baton pass status of each station
SW74 Cyclic transmission status of each station
SW78 Parameter communication status of each station
T2 to T5, T100 to T104 For interlock between own station and other station
Device Description