User`s manual

227
CHAPTER 7 PROGRAMMING
7
7.2 When Using the QD65PD2 in a MELSECNET/H Remote I/O net 7.2.1 Program example when the parameters of the intelligent function module are used
• program for the sampling counter function
• program for the periodic pulse counter function
(d) Program for the comparison output function
• program for the coincidence output function
• program for the cam switch function
(e) Program for overflow/underflow detection processing
Turn on CH1 Selected counter
function start command.
Turn off CH1 Selected counter
function start command.
Turn on CH1 Selected counter
function start command.
Turn off CH1 Selected counter
function start command.
Turn on CH1 Coincidence output
enable command.
Turn on Reset command (coincidence
output 1).
Turn off Reset command (coincidence
output 1).
Turn on CH1 Count enable command.
Turn on CH1 Cam switch function/
PWM output start command.
Turn on CH1 Coincidence output
enable command.