User`s manual

231
CHAPTER 7 PROGRAMMING
7
7.2 When Using the QD65PD2 in a MELSECNET/H Remote I/O net 7.2.2 Program example when the parameters of the intelligent function module are not used
X20 Count start signal
QX10(X20 to X2F)
X21 Present value read signal
X22 Allow coincidence output signal
X23 Preset/replace command signal
X24 Count stop signal
X25 Coincidence LED clear signal
X26 Count disable start signal
X27 Count disable stop signal
X28 Latch count value read signal
X29 Latch counter start command signal
X2A Sampling count value read signal
X2B Sampling counter start signal
X2C Periodic pulse count value read signal
X2D Periodic pulse counter start signal
X2E Cam switch start signal
X30
Latch count value (latch counter input
terminal) read signal
QX10(X30 to X3F)
X32 Frequency measurement start signal
X33 Frequency measurement stop signal
X34 Rotation speed measurement start signal
X35 Rotation speed measurement stop signal
X36
Pulse measurement (function input terminal)
start signal
X37
Pulse measurement (latch counter input
terminal) start signal
X38
Pulse measurement (function input terminal)
stop signal
X39
Pulse measurement (latch counter input
terminal) stop signal
X3A PWM output start signal
X3B Error/warning reset command signal
Y40
LED signal for checking the coincidence
output 1
QY10(Y40 to Y4F)
Y41
LED signal for checking the coincidence
output 2
Y42 LED signal for checking underflow occurrence
Y43 LED signal for checking overflow occurrence
Y44
LED signal for checking that PWM output is in
process
Device Description