User`s manual

232
X1020 Module ready
QD65PD2(X/Y1020 to X/Y103F)
X1021
Operating condition settings batch-changed
signal
X1028
CH1 Cam switch function/PWM output in
process signal
X1030 Coincidence output 1 signal
X1031 Coincidence output 2 signal
Y1021
Operating condition settings batch-change
command
Y1022 CH1 Coincidence output enable command
Y1023 CH1 Preset/replace command
Y1026 CH1 Count enable command
Y1027
CH1 Selected counter function start
command
Y1028
CH1 Cam switch function/PWM output start
command
Y1030 Reset command (coincidence output 1)
M10 Initial setting complete signal
M100 Device for checking the master module status (for performing the MC/MCR instruction)
M101 to M103 Initial setting complete flag
M138 Error status acquired
M139 Warning status acquired
M200, M201
Stores that the Z(P).REMTO instruction is complete or the result of the instruction
M204, M205
M208 to M213
M216, M217
M220, M221
M230, M231
M234, M235
M238, M239
M242, M243
M400, M401
M450, M451
M452, M453
M470, M471
M472, M473
M490, M491
M492, M493
M494, M495
M510, M511
M512, M513
M514, M515
M530 to M533
M550, M551
Device Description