User`s manual

233
CHAPTER 7 PROGRAMMING
7
7.2 When Using the QD65PD2 in a MELSECNET/H Remote I/O net 7.2.2 Program example when the parameters of the intelligent function module are not used
*1 Stores the error code of the error in process.
*2 Stores the latest error code, and hold it also after an error reset.
*3 Stores the warning code of the warning in process.
*4 Stores the latest warning code, and hold it also after an error reset.
M250, M251
Stores that the Z(P).REMTO instruction is complete or the result of the instruction
M254, M255
M258, M259
M262, M263
M266, M267
M270, M271
M282, M283
M300 to M303
M306 to M309
M312 to M315
M318 to M321
M460 to M465
M480 to M485
M500 to M505
M520 to M525
M552 to M557
D100 to D109
Stores data written by the Z(P).REMTO instruction (for default setting)
D120 to D123
D130
D150 to D163
D40, D41
D50 to D53
D60
D70
D80 to D84
D210, D211
SB20 Network module status
SB47 Baton pass status (own station)
SB49 Data link status (own station)
SW70 Baton pass status of each station
SW74 Cyclic transmission status of each station
SW78 Parameter communication status of each station
T0
For interlock with Operating condition
settings batch-change command
T2 to T5
For interlock between own station and other station
T100 to T104
Device Description