User`s manual

237
CHAPTER 7 PROGRAMMING
7
7.2 When Using the QD65PD2 in a MELSECNET/H Remote I/O net 7.2.2 Program example when the parameters of the intelligent function module are not used
• program for the latch counter function by counter function selection
• program for the count disable function
CH1 Latch count value is read.
CH1 Latch count value update flag
reset command: Reset (1
H)
CH1 Latch count value update flag
reset command is read.
CH1 Latch count value update flag is
read.
Turn off CH1 Selected counter
function start command.
Turn on CH1 Selected counter
function start command.
Turn off CH1 Selected counter
function start command.
Turn on CH1 Selected counter
function start command.