User`s manual

239
CHAPTER 7 PROGRAMMING
7
7.2 When Using the QD65PD2 in a MELSECNET/H Remote I/O net 7.2.2 Program example when the parameters of the intelligent function module are not used
• program for the periodic pulse counter function
CH1 Periodic pulse count value
update flag reset command: Reset (1
H)
CH1 Periodic pulse count value
update flag reset command is read.
CH1 Periodic pulse count value
update flag is read.
CH1 Periodic pulse count difference value,
CH1 Periodic pulse count present value, and
CH1 Periodic pulse count update check
value are read.
Turn off CH1 Selected counter
function start command.
Turn on CH1 Selected counter
function start command.