User`s manual

244
(4) Program example of the rotation speed measurement mode
Parameter communication status
check of a remote I/O station
Cyclic transmission status check of
a remote I/O station
Baton pass status check of a remote
I/O station
Data link status check of the master
station
Master module status check
CH1 Moving average count (rotation
speed measurement): three times
Turn off CH1 Count enable command.
Turn on CH1 Count enable command.
CH1 Time unit setting (rotation speed
measurement): 0.01s
Baton pass status check of the master
station
CH1 Number of pulses per
rotation: 1000