User`s manual

249

CHAPTER 7 PROGRAMMING

7.2 When Using the QD65PD2 in a MELSECNET/H Remote I/O net

7.2.2 Program example when the parameters of the intelligent function module are not used

(6) Program example of the PWM output mode

CH1 PWM output assignment

setting (coincidence output 1)

: Assignment

Turn on CH1 Cam switch

function/PWM output start

command.

CH1 PWM output ON time setting

: 1000

CH1 PWM output cycle time

setting: 2000

Baton pass status check of the

master station

Master module status check

Data link status check of the

master station

Baton pass status check of a

remote I/O station

Cyclic transmission status check

of a remote I/O station

Parameter communication status

check of a remote I/O station