User`s manual

275
APPENDICES
A
Appendix 2 When Using GX Developer Appendix 2.1 Operation of GX Developer
Appendix 2 When Using GX Developer
This appendix explains how to operate GX Developer.
When using GX Developer, configure the initial settings and the auto refresh settings with the sequence program.
• Program example when the parameters of the intelligent function module are not used ( Page 204,
Section 7.1.2)
(1) Applicable software version
For applicable software versions, refer to the following section.
Page 21, Section 2.1 (3)
Appendix 2.1 Operation of GX Developer
When using GX Developer, set the following dialogue boxes.
(1) I/O Assignment
Open "I/O Assignment".
Parameter [PLC Parameter] [I/O Assignment]
Dialogue box name Use Reference
I/O Assignment Set the type of the module to be mounted and the I/O signal range.
Page 275, Appendix
2.1(1)
Switch Setting Set each setting of the QD65PD2 counter functions.
Page 276, Appendix
2.1(2)
Item Setting
Type Select "Intelligent".
Module Name Input the model name of the module.
Points Select 32 points.
Start XY Input any start I/O number of the QD65PD2.