User`s manual

76
(30)CH1 Sampling count value (Un\G1056, Un\G1057)
• These memories store the count value during the sampling period when the sampling counter function is
used.
• The stored value is cleared to 0 by turning off and on Operating condition settings batch-change command
(Y01).
(31)CH1 Periodic pulse count, difference value (Un\G1058, Un\G1059)
• These memories store the difference of the count values between the previous one and the present one at
regular time intervals when the periodic pulse counter function is used.
• The stored value is cleared to 0 by turning off and on Operating condition settings batch-change command
(Y01).
(32)CH1 Periodic pulse count, present value (Un\G1060, Un\G1061)
• These memories store the count value (present one) at regular time intervals when the periodic pulse
counter function is used.
• The stored value is cleared to 0 by turning off and on Operating condition settings batch-change command
(Y01).
(33)CH1 Periodic pulse count value update check (Un\G1062, Un\G1063)
• When the periodic pulse counter function is used, these memories store the same value stored in CH1
Periodic pulse count, difference value (Un\G1058, Un\G1059) after the completion of update of values both
in CH1 Periodic pulse count, difference value (Un\G1058, Un\G1059) and CH1 Periodic pulse count, present
value (Un\G1060, Un\G1061).
• When the value in CH1 Periodic pulse count value update check (Un\G1062, Un\G1063) differs from the one
in CH1 Periodic pulse count, difference value (Un\G1058, Un\G1059), read again all of the values in CH1
Periodic pulse count, difference value (Un\G1058, Un\G1059), CH1 Periodic pulse count, present value
(Un\G1060, Un\G1061), and CH1 Periodic pulse count value update check (Un\G1062, Un\G1063) because
there is a value discrepancy.
• The stored value is cleared to 0 by turning off and on Operating condition settings batch-change command
(Y01).