User`s manual
77
CHAPTER 3 SPECIFICATIONS
3
3.4 Buffer Memory Assignment
3.4.2 Details of the buffer memory
(34)CH1 Selected counter function (Un\G1070)
• This memory stores the values indicating the selected counter functions.
• The stored value is not cleared to 0 when Operating condition settings batch-change command (Y01) is
turned off and on, and the value remains the same.
(35)CH1 Sampling counter/periodic pulse counter operation flag (Un\G1071)
• This memory stores the values indicating the operation status of the sampling counter function or the
periodic pulse counter function.
• The stored value is cleared to 0 by turning off and on Operating condition settings batch-change command
(Y01).
Function Value to be stored
Count disable function
0
H
Latch counter function
1
H
Sampling counter function
2
H
Periodic pulse counter function
3
H
Count disable/preset/replace function
4
H
Latch counter/preset/replace function
5
H
Operation status Value to be stored
Not operating
0
H
Operating
1
H