User`s manual

79
CHAPTER 3 SPECIFICATIONS
3
3.4 Buffer Memory Assignment 3.4.2 Details of the buffer memory
(37)CH1 Latch count value update flag (Un\G1074)
• This memory stores the value indicating whether CH1 Latch count value (Un\G1052, Un\G1053) are
updated or not.
When the memories are updated, 1
H
is stored. When the memories are not updated, 0
H
is stored.
• CH1 Latch count value (Un\G1052, Un\G1053) are updated without resetting CH1 Latch count value update
flag (Un\G1074).
To check the update status of CH1 Latch count value (Un\G1052, Un\G1053) once again, reset CH1 Latch
count value update flag (Un\G1074) by using CH1 Latch count value update flag reset command
(Un\G1022).
If you try to reset it by turning off and on Operating condition settings batch-change command (Y01), not only
the stored value in CH1 Latch count value update flag (Un\G1074) but also buffer memories for the data
classification Md1 are cleared to 0. Please note that.
(38)CH1 Latch count value update flag (latch counter input terminal) (Un\G1075)
• This memory stores the value indicating whether CH1 Latch count value (latch counter input terminal)
(Un\G1054, Un\G1055) are updated or not.
When the memories are updated, 1
H
is stored. When the memories are not updated, 0
H
is stored.
• CH1 Latch count value (latch counter input terminal) (Un\G1054, Un\G1055) are updated without resetting
CH1 Latch count value update flag (latch counter input terminal) (Un\G1075).
To check the update status of CH1 Latch count value (latch counter input terminal) (Un\G1054, Un\G1055)
once again, reset CH1 Latch count value update flag (latch counter input terminal) (Un\G1075) by using CH1
Latch count value update flag reset command (latch counter input terminal) (Un\G1023).
If you try to reset it by turning off and on Operating condition settings batch-change command (Y01), not only
the stored value in CH1 Latch count value update flag (latch counter input terminal) (Un\G1075) but also
buffer memories for the data classification Md1 are cleared to 0. Please note that.
(39)CH1 Sampling count value update flag (Un\G1076)
• This memory stores the value indicating whether CH1 Sampling count value (Un\G1056, Un\G1057) are
updated or not.
When the memories are updated, 1
H
is stored. When the memories are not updated, 0
H
is stored.
• CH1 Sampling count value (Un\G1056, Un\G1057) are updated without resetting CH1 Sampling count value
update flag (Un\G1076).
To check the update status of CH1 Sampling count value (Un\G1056, Un\G1057) once again, reset CH1
Sampling count value update flag (Un\G1076) by using CH1 Sampling count value update flag reset
command (Un\G1024).
If you try to reset it by turning off and on Operating condition settings batch-change command (Y01), not only
the stored value in CH1 Sampling count value update flag (Un\G1076) but also buffer memories for the data
classification Md1 are cleared to 0. Please note that.