Specifications

5-3. Installation

The EB-50 must be installed inside the metal control box.

Either the supplied L-fittings or DIN rail attachments can be used for the installation.

To prevent injury, install the controller on a flat surface

strong enough to support its weight.

To reduce the risk of shorting, current leakage, electric

shock, malfunctions, smoke, or fire, do not install the

controller in a place exposed to water or in a condensing

environment.

To reduce the risk of electric shock, malfunctions, or fire,

seal the gap between the cable access holes with putty.

Do not install the controller on the panel door of the metal control

box.

Vibrations or shocks to the controller may damage the controller or

cause the controller to fall.

Leave a space around the EB-50 as shown in the figure below.

20 (13/16) 20 (13/16)(165 (6-1/2))(165 (6-1/2))

40 (1-19/32)

50 (1-31/32)

(120 (4-3/4))(120 (4-3/4)) 20 (13/16)

70 (2-25/32)

20 (13/16) 20 (13/16)(165 (6-1/2)) (165 (6-1/2))

40 (1-19/32)

50 (1-31/32)

(120 (4-3/4))(120 (4-3/4)) 20 (13/16)

70 (2-25/32)

EB-50 EB-50

Unit: mm (in)

Fig. 5-1 When using L-fittings Fig. 5-2 When using DIN rail