User`s manual

10 - 16
MELSEC-Q
10. POSITIONING DEBUGGING
DISPLAY/SETTING SCREEN
[JOG/MPG monitor]
(Screen example shows <Axis #1> Operation monitor.)
DISPLAY/SETTING DATA
Item Description
FWD JOG
RVS JOG
Indicates the direction during JOG operation in the sequence program.
JOG speed
Indicates the axis speed during JOG operation in the sequence program.
Buffer memory address (Axis #1): 1518, 1519
JOG speed limit value
Indicates the JOG operation limit value set in the extended parameters 2.
Buffer memory address (Axis #1): 48, 49
JOG Acceleration time
JOG Deceleration time
Shows the acceleration time and deceleration time set in the extended parameters 2.
Buffer memory address (Axis #1): 50/51
MPG enable
Shows if manual pulse operation is allowed or not.
Permission setting in the test mode from the peripheral device is not displayed.
Buffer memory address (Axis #1): 1524
MPG input mode
Shows the MPG pulse input mode set in the extended parameters 1.
Buffer memory address (Axis #1): 33
MPG input magnification
Indicates the factor per MPG output pulse set in the sequence program is multiplied by to
find the number of input pulses.
Buffer memory address (Axis #1): 1522, 1523