User`s manual

10 - 17
MELSEC-Q
10. POSITIONING DEBUGGING
10.3 Sampling Monitor
Monitor the ON/OFF of any registered signals and the buffer memory values while
simultaneously sampling them.
10.3.1 Sampling signal monitor
PURPOSE
You can monitor the ON/OFF of the specified X/Y devices, external I/O signals and
status signals in the timing chart.
BASIC OPERATION
1. Choose Sampling monitor (signal).
Double-click. Double-click.
2. Click the "Setup" button in the Sampling monitor (signal) window.
3. Set the signals in the Sampling monitor dialog box.
4. Click the [Online]
[Monitor] [Monitor On/Off] menu ( ).
5. Check the monitor results.
6. To exit, click the [Online]
[Monitor] [Monitor On/Off] menu ( ).
DISPLAY/SETTING SCREEN
[Sampling monitor (signal)]