User`s manual

10 - 19
MELSEC-Q
10. POSITIONING DEBUGGING
10.3.2 Sampling buffer monitor
PURPOSE
You can monitor the buffer memory storage values of the specified QD75 as
waveform data.
BASIC OPERATION
1. Choose Sampling monitor (Buffer).
Double-click. Double-click.
2. Click the "Setup" button in the Sampling monitor (Buffer) window.
3. Set the buffer memory addresses, upper limit value and lower limit value in the
Sampling Buffer area data setting dialog box.
4. Click the [Online]
[Monitor] [Monitor On/Off] menu ( ).
5. Check the monitor results.
6. To exit, click the [Online]
[Monitor] [Monitor On/Off] menu ( ).
DISPLAY/SETTING SCREEN
[Sampling monitor (Buffer)]