User`s manual

10 - 25
MELSEC-Q
10. POSITIONING DEBUGGING
10.4.2 Present value change test
PURPOSE
Change the feed present value of the QD75 to the specified address.
BASIC OPERATION
1. Place the QD75 in the test mode in accordance with Section 10.4 (1).
2. Click the [Online] [Test] [Operation test] [Operation test #1 to #4] menu (
to
).
3. Click the <<Feed present value CHG>> tab in the TEST MODE setting dialog
box.
4. Type a new value in the text box and click the "Present-value change" button.
5. To exit, click the "Close" button.
DISPLAY/SETTING SCREEN
DISPLAY/SETTING DATA
Item Description
Monitor Shows the axis status.
Present value change Set a new feed present value.
"Present value change"
button
Click this button to change the present value.
"All axis stop" button Click this button to stop all axes.
"Stop" button Click this button to stop the axis.
<<Position start>> tab
<<Speed CHG>> tab
<<OPR>> tab
<<JOG/MPG>> tab
Click the tab to show the corresponding test screen.
Positioning start test........Refer to Section 10.4.1.
Speed change test..........Refer to Section 10.4.3.
OPR test..........................Refer to Section 10.4.4.
JOG/MPG test.................Refer to Section 10.4.5.