User`s manual

1 - 8
MELSEC-Q
1. OVERVIEW
1.3 Additions/Modifications Function according to SW0D5C-QD75P-E Versions
Additions/Modifications Functions for each Versions of SW0D5C-QD75P-E are given
below.
Versions of SW0D5C-QD75P-E 2
Function 1
Version 30D or later Version 20C or below
Reference
Connection Setup
• Addition of PLC No. setting of multiple PLC 3
(for multiple PLC system)
• Addition of Q corresponding MELSECNET/H network
remote I/O module
4 connection setup
Yes No Section 7.1
Addition of parameter for speed-position switching
control (ABS mode) 5
<Speed-position function selection>
Yes No Section 8.1
Signal monitoring for pre-reading start function 5
<Y14: Axis #1 execution prohibition flag>
<Y15: Axis #2 execution prohibition flag >
<Y16: Axis #3 execution prohibition flag >
<Y17: Axis #4 execution prohibition flag >
Yes No Section 10.2.4
1:Compatible with the function version "B" of the QD75. For confirmation of the QD75
function version, refer to "Section 7.3 Checking the QD75 Function Version (OS
Information)".
2:For confirmation of the SW0D5C-QD75P-E version, refer to "Section 11.10 Help".
3:For details, refer to "QCPU (Q Mode) User's Manual (Function Explanation,
Program Fundamentals)".
4:For details, refer to "Q Corresponding MELSECNET/H Network System Reference
Manual (Remote I/O Net)".
5:For details, refer to "QD75 User's Manual" (SH-080058-B or later).