User`s manual

6 - 2
MELSEC-Q
6. PROJECT CREATION
6.1 Creating a New Project
Set the QD75 model used to create a new project and the project items.
1) Click the [Project] [New Project] menu ( ).
2) Click the "Reference" button of the QD75 type in
the [New Project] dialog box.
3) Choose the Select type and Select Axis radio
buttons.
4) Click the "OK" button.
5) Set the project save path.
The project save path defaults to
C:\MELSEC\QD75P.
When changing it, refer to "HELPFUL
OPERATION (PART 1)" in this section.
6) Set the project name.
When specifying the project file name, you can
use a total of up to 150 characters to set the
project path and project name.
When setting the project path and project name,
the total number of characters should be within
150.
This screen assumes that the project name is
"Sample01".
7) Set the project title as required.
8) Click the "OK" button.
This creates a new project.
To utilize the data read from the QD75, refer to
"HELPFUL OPERATION (PART 2)" in this
section.