User`s manual

6 - 6
MELSEC-Q
6. PROJECT CREATION
6.3 Saving the Project
PURPOSE
The project file which is currently edited is saved.
BASIC OPERATION
1. Set the project to be saved as the active project. (Refer to Section 5.2.)
2. To perform save operation, click the [Project]
[Save Project] menu ( ).
To perform save as operation, click the [Project]
[Save as Project] menu.
When specifying the project file name, you can use a total of up to 150
characters to set the project path and project name.
When setting the project path and project name, the total number of characters
should be within 150.
For the operation of setting the project save path and project name, refer to
"HELPFUL OPERATION (PART 1)" in Section 6.1.
DISPLAY/SETTING SCREEN
HELPFUL OPERATION
You cannot use "Save as Project" to overwrite the same project name.
When you want to change the title in the same project name, perform the following
operation.
1. Double-click "Project information" on the Project tree view.
2. Click the unchecked "Modified title " check box in the Project information window
and change the current title.
3. Click the [Project]
[
Save Project] menu.
• When saving a project, you cannot set "Untitled" in Project name.
Also, do not use "Untitled n (n: 1, 2, 3 .....)" in Project name.
If you read "Untitled 1" and create a new project in default setting, the same
project name (Untitled 1) appears on the Project tree view.