User`s manual

6 - 9
MELSEC-Q
6. PROJECT CREATION
6.6 Reading Other Format Files
6.6.1 Reading SW1IVD-AD75P-E format file
PURPOSE
The positioning data, M code comments, block start data, condition data and
parameters are read from the file of the MELSEC-A series software package
(SW1IVD-AD75P-E, SW0D5C-AD75P-E) as a new project of SW
D5C-QD75P-
E.
BASIC OPERATION
1. Click the [Project] [Import file] [File reading of SW1IVD-AD75P]/[File
reading of SW0D5C-AD75P] menu.
2. Choose the file in the Open dialog box and click the "Open" button.
3. Click the "OK" button in the read destination confirmation dialog box.
4. Set the QD75 model, project save path, project name and project title in the
Other file type project dialog box. (Refer to Section 6.1 "HELPFUL
OPERATION (PART 1)".)
5. Click the "OK" button.
DISPLAY/SETTING SCREEN
(The screen shows an example of SW0D5C-AD75P file read.)
DISPLAY/SETTING DATA
Item Description
Look in Choose the project save path of the file you will read.
File name Set the file name you will read.
Files of type SW1IVD-AD75P-E File (*.d75) or SW0D5C-AD75P-E File (*.w75) appears.
"Up One Level" button Click this button to show the folder one level above the currently displayed folder.
"List" button Click this button to list files and folders.
"Details" button Click this button to display the file and folder in detail.
"Open" button Click this button to read the file.