User`s manual

A - 8
How to Use This Manual
DISPLAY/SETTING SCREEN
8.2.2 M code comment
Set comments to M codes which are required for control exercised in
synchronization with positioning.
M code comments are data which can be saved only on the peripheral device.
Up to 50 comments can be set for each axis.
1. Choose the positioning data of the axis to which the M code comments will be set.
2. Click the [Edit] → [M code comment] menu.
3. Set the M code comments.
4. To exit, click the "OK" button in the M code comment dialog box.
Item
Description
M code
M code comment
Set the M code No. to be commented.
Set a comment of up to 32 characters.
Up to 50 comments can be set for each axis.
Operation to be performed until the actual
operation screen appears.
Screen used to make setting or provide display
for the purpose being described.
Purpose of operation explained in each
chapter, section or paragraph.
PURPOSE
BASIC OPERATION
DISPLAY/SETTING DATA
Explains the display/setting screen items.
PURPOSE
BASIC OPERATION
DISPLAY/SETTING SCREEN
DISPLAY/SETTING DATA
Double-click.Double-click.
Click this button to finish the setting.
Click this button to delete the comment chosen.
"OK" button
"Delete" button