User`s manual

A
-4
CONTENTS
1. Overview ........................................................................................................1
2. Performance Specifications ...........................................................................2
3. Handling.........................................................................................................3
3.1 Handling Precautions................................................................................3
4. Part Identification Nomenclature ....................................................................4
5. Wiring.............................................................................................................7
5.1 Wiring Precautions ...................................................................................7
5.2 External Interface ...................................................................................10
5.3 Wiring of the differential driver common terminal....................................12
6. External Dimensions ....................................................................................13
About Manuals
The following manuals are related to this product.
Referring to this list, please request the necessary manuals.
Related Manual
Manual name
Manual No.
(Model code)
Type QD75P/QD75D Positioning Module User’s Manual SH-080058
(13JR09)
GX Configurator-QP Version 2 Operating Manual
(SW2D5C-QD75P-E)
SH-080172
(13JU19)
Compliance with the EMC and Low Voltage Directives
(1) For programmable controller system
To configure a system meeting the requirements of the EMC and Low
Voltage Directives when incorporating the Mitsubishi programmable
controller (EMC and Low Voltage Directives compliant) into other
machinery or equipment, refer to Chapter 9 "EMC AND LOW
VOLTAGE DIRECTIVES" of the QCPU User's Manual (Hardware Design,
Maintenance and Inspection).
The CE mark, indicating compliance with the EMC and Low Voltage
Directives, is printed on the rating plate of the programmable controller.
(2) For the product
To make this product conform to the EMC and low voltage directives,
please refer to Chapter 5 "Wiring".