Specifications

Print Data *Manual Number Revision
Oct.,1997 IB(NA)67286-C Instructions added for compliance with the UL/C-UL Standard
Addition of single-phase 230VAC input power supply
Section 2-2-2, (2) to (4) Deletion of reset-on stop operation
Section 2-3-5, (4) Correction made to LSP/LSN signal stop
pattern selection in parameter No. 22
Section 3-1-2, (4), 2) Correction made to description of encoder
Z-phase pulse functions and applications
Section 3-1-4, (7) Addition of source input interface
Section 3-2-3, (4) Addition of electromagnetic brake
connector
Section 3-3 Change in P15R connection
Section 3-5, (2), (4) Addition of VDD-COM connection
Section 3-7, (3), 2) Deletion of reset signal ON/OFF
Section 6-1-2, (2), 1) Change in connection diagram
Section 6-1-2, (2), 3) Change in connector type
Section 6-2-1 Change in UVW cable size
Section 6-2-2 Deletion of text
Section 9-2 Change in Note 1
Section 9-3 Addition of electromagnetic brake
characteristics of HC-SF/HC-RF
Section 9-4 Change in dynamic brake's brakable load
inertia moment ratio
Section 10-2, (3) Correction made to HC-SF graph
Section 10-3 Addition of reduction gears for use with HC-
SF/HC-RF
Section 10-4 Change in shaft end machining diagram for
HC-SF/HC-RF
Section 10-5-2 Addition of HC-SF/HC-RF servo motors
with electromagnetic brakes
Nov.,1998 IB(NA)67286-D Changes made to the instructions for compliance with the UL/C-UL Standard
Section 1-1, (2) Deletion of model explanation
Section 1-1-2 Addition of model makeup
Section 1-1-3 Addition of combinations with servo motors
Section 3-1-3, (1), 4) Addition of pulse train input
Section 3-1-3, (3), 1), a Reconsideration of rotation direction for
negative polarity in Table 3-4
Section 3-2-2 Deletion of servo motor shape
Section 3-2-3, (3) Addition of HC-UF3000r/min series
Section 3-2-3, (5) Addition of HC-UF2000r/min series
Ex-Section 3-2-4 Deletion of selection of the cable plug
Section 3-2-4 Addition of connectors used for servo motor wiring
Section 6-2-2 Deletion of fuse models
Section 9-1, (2) Addition of data for MR-J2-200C/350C
Section 9-2 Addition of HC-SF81 to 301/HC-SF103 to
353/HC-UF72 to 202/HC-UF13 to 73
Section 9-3 Addition of HC-SF81 to 301/HC-SF103 to
353/HC-UF72 to 202/HC-UF13 to 73
Section 10-5-2, (5) Addition of HC-SF81 to 301/HC-SF103 to 353
Section 10-5-2, (7) Addition of HC-UF series
*The manual number is given on the bottom left of the back cover.
REVISIONS