Specifications

2. OPERATION
2– 48
47 *DI6 Input signal selection 6 (CN1B-pin 8): 0883 0000h
to
0999h
P • S • T
48 *DI7 Input signal selection 7 (CN1B-pin 9): 0994 0000h
to
0999h
P • S • T
Allows any input signal to be assigned to CN1B-pin 8.
The assignable signals and setting method are the
same as in input signal selection 2 (parameter No. 43).
Allows any input signal to be assigned to CN1B-pin 9.
The assignable signals and setting method are the
same as in input signal selection 2 (parameter No. 43).
Class No.
Symbol
Initial
Value
Unit
Setting
Range
Control
Mode
Name and Function
Expansion parameters
This parameter is unavailable
when parameter No. 42 is set to
assign the control change signal
(LOP) to CN1B-pin 8.
MEMORANDUM
Position
control mode
Torque control mode
Speed control
mode
Input signals of
CN1B-pin 8
selected.
0
Position
control mode
Torque control mode
Speed control
mode
Input signals of
CN1B-pin 9
selected.
0
This parameter is unavailable
when parameter No. 42 is set to
assign the control change signal
(LOP) to CN1B-pin 9.
MEMORANDUM
When "Use in absolute position detection system" is
selected with parameter No. 1, the CN1B-9 pin comes
into the ABS transfer mode (ABSM).
When "Use in absolute position detection system" is
selected with parameter No. 1, the CN1B-8 pin comes
into the ABS transfer mode (ABSM).