MFZ-KJ Operation Manual

En-8
SLEEP OPERATION
Press during COOL or HEAT mode page 5 to
start POWERFUL operation.
Fan speed : Exclusive speed for POWERFUL mode
Horizontal vane : Set position, or downward airflow position during
AUTO setting
• Temperature cannot be set during POWERFUL operation.
Press again to cancel POWERFUL operation.
• POWERFUL operation is also cancelled automatically in 15 minutes,
or when the ON/OFF, FAN, ECONO COOL, SLEEP, or SMART SET
button is pressed.
POWERFUL OPERATION
1
Press or during operation to set the timer.
(ON timer) : The unit turns ON at the set time.
(OFF timer) : The unit turns OFF at the set time.
* or blinks.
*
Make sure that the current time and day are set correctly. Page 4
2
Press (Increase) and (Decrease) to set the
time of timer.
Each press increases or decreases the set time by 10 minutes.
• Set the timer while
or is blinking.
3
Press
or
again to cancel timer.
Note:
• ON and OFF timers can be set together. mark indicates the order of timer
operations.
• If power failure occurs while ON/OFF timer is set, see page 5 “Auto restart
function”.
1
Press during COOL, DRY, HEAT or FAN mode
page 5 to select SLEEP operation.
Fan speed : AUTO
Horizontal vane : Position set on the remote controller
Operation indicator lamp : Dimly lit
2
Press (Increase) and (Decrease) to set the
temperature of SLEEP operation.
• Once the above procedure is completed, the settings will be saved.
• After the settings are saved, a single push of
during operation
activates SLEEP operation with the same settings every time.
• Temperature for SLEEP operation cannot be set during DRY or FAN
mode.
3
Press again to cancel SLEEP operation.
• The operation returns to the previous settings.
• SLEEP operation is also cancelled when the FAN button is pressed or
the operation mode is changed.
Set temperature for SLEEP operation.
For about 30 minutes after is pressed, the set temperature remains
as set for the operation running when the SLEEP button is pressed. It
will change to the set temperature for SLEEP operation in about 30 min-
utes. Pressing
again returns the operation to the previous settings.
TIMER OPERATION (ON/OFF TIMER)
Note:
• ON/OFF timer is available during SLEEP operation.
• When a preset ON time for the weekly timer arrives during SLEEP operation,
the weekly timer operation has priority. SLEEP operation will be cancelled,
and the operation set on the weekly timer will start.
is
pressed.
is
pressed.
For about 30
minutes
Set
temperature for
the operation
before SLEEP
operation
Set temperature for
SLEEP operation
Set temperature for
the operation before
SLEEP operation
JG79Y070H01_en.indd 8 2015/11/18 9:23:05