Submittal

M-SERIES
Specications are subject to change without notice. © 2016 Mitsubishi Electric US, Inc.
Job Name:
System Reference: Date:
SUBMITTAL DATA: MFZ-KJ12NA-U1
12,000 BTU/H FLOOR-MOUNTED INDOOR UNIT FOR MXZ-C MULTI-ZONE HEAT-PUMP SYSTEMS
Indoor Unit: MFZ-KJ12NA-U1
Wireless Remote Controller
ACCESSORIES:
Indoor Unit
□ Condensate Pump (BlueDiamond X87-711/721; 115/230V)
□ Condensate Pump (Sauermann SI30-115/230; 115/230V)
□ Anti-Allergy Enzyme Filter (MAC-408FT-E)
□ Platinum Catalyst Deodorizing Filter (MAC-308FT-E)
□ Drain Pan Level Sensor (DPLS2)
Controls
□ Wireless Controller (MHK1)
□ Wired Remote Controller (PAR-33MAA; req. MAC-333IF-E)
□ Wireless Temperature and Humidity sensor (PAC-USWHS003-TH-1)
□ Thermostat Interface (PAC-US444CN-1)
SPECIFICATIONS:
Rated Capacity*
Cooling
1
Btu/h / W
12,000
Heating at 47º F
2
Btu/h / W
13,000
Rating Conditions per AHRI Standard:
1
Cooling | Indoor: 80º F(27º C)DB / 67º F(19º C)WB ; Outdoor: 95º F(35º C)DB / 75º F(24º C)WB
2
Heating at 47ºF | Indoor: 70º F (21º C)DB / 60º F (16º C)WB ; Outdoor: 47º F (8º C)DB / 43º F (6º C)WB
For data on specic indoor units (all ducted, all non-ducted, and both ducted and non-ducted)
combinations, see the MXZ Technical and Service Manual.
Applications should be restricted to comfort cooling only; equipment cooling applications are not
recommended for low ambient temperature conditions.
Electrical Power
Requirements
208 / 230V, 1-Phase, 60 Hz
Minimum Circuit
Ampacity (MCA)
A
1
Blower Motor (ECM)
F.L.A.
0.62
Blower Motor Output
W
30
Field Drainpipe Size O.D.
In.(mm)
5/8 (15)
Airow Rate (Quiet - Lo - Med - Hi - Super Hi)
Cooling
DRY
CFM
138-173-208-251-275
WET
117-147-177-213-234
Heating DRY
138-159-180-219-343
Sound Pressure Level (Quiet - Lo - Med - Hi - Super Hi)
Cooling
dB(A)
21-25-30-34-38
Heating
21-24-27-32-41
Unit Dimensions
(H x W x D)
In.(mm)
23-5/8 x 29-17/32 x 8-15/32
(600 x 750 x 215)
Package Dimensions
(H x W x D)
In.(mm)
27-3/4 x 32-3/4 x 12
(693 x 816 x 275)
Unit/Package Weight
Unit
Lbs.(kg)
33 (15)
Package
Lbs.(kg)
41 (18.5)
External Finish
Munsell 1.0Y 9.2 / 0.2
Refrigerant Piping (Flared)
Liquid (High Pressure)
In.(mm)
1/4 (6.35)
Gas (Low Pressure)
3/8 (9.52)