Specifications

α
2 Simple Application Controllers
SMS/SMR/CD Functions and the Modem Setting 2
2 - 2
2.1.1 GSM & Serial Communication Dialog Box
The GSM and Serial Communication Dialog Box is used to set the equipment and
communication type for the controller.
Refer to the AL-PCS/WIN-E Software Manual for further information concerning VLS.
Click the “GSM” option to enable GSM telemetric functionality.
A) Not Use
This default setting is for situations in which no communication will be used. The AT command
is not activated.
B) Modem
This setting is used when a standard modem will be connected to the
α
2 for use in Remote
Access.
C) G
SM
This setting is used when a GSM modem will be connected either to send an SMS message or
for Remote Access.
D) O
ther
This setting is used for Dedicated Protocol communication.
E) P
in Code
The GSM PIN (Personal Identification Numbers for use of GSM)
F) Pin Code with the quotation mark
GSM SIM PIN is sent to the modem in quotation marks (necessary for Sony Ericsson GSM
modem)
G) Remote Access
Setting to allow GSM modems to have Remote Access.
H) Data Format
Settings for Com ports and message protocol.
I) Initialize Modem
AT Command used to initialize a modem. See section 2.1.2 for more details.
)
)
)
)
)
)
)
)
)
E
F
G
I
B
A
C
D
H