Specifications

α
2 Simple Application Controllers
SMS/SMR/CD Functions and the Modem Setting 2
2 - 19
2.5.4 Set SMS
The SMS menu is used to set the telephone numbers for the Service
Provider, the destination numbers for mobile phones, the access code
for e-mail messages, and the Validity Period of the messages.
SMS Provider Mobile Access Number (SMSC1)
The SMSC1 is the number used to access the Service Provider section
for mobile phones. Choose the digits and symbols using the “ ”
and
“ ” arrows. After the digit is set, move to the left or right with the “ ”
and
“” keys. Do not press the “OK” button until the command has
been entered in its entirety.
SMS Provider Gateway Access Number (SMSC2)
The SMSC2 is the number used to access the E-mail gateway
telephone number of the SMS Service Provider. Choose the digits and
symbols using the “ ”
and “ ” arrows. After the digit is set, move to the
left or right with the “ ” and
“” keys. Do not press the “OK” button
until the command has been entered in its entirety. This number might be the same as used in
SMSC1.
Destination Address (DA1, DA2, DA3)
Enter the mobile telephone number or the Service Provider e-mail
G
ateway code in this window. The number entered here can be
accessed by a GSM/SMS Function Block in the user program when
trying to send an SMS message.
Choose the digits and symbols using the “ ”
and “ ” arrows. After the digit is set, move to the
left or right with the “ ” and “ ”
keys. Do not press the “OK” button until the command has
been entered in its entirety.
Three destination mobile telephone numbers can be entered, one in each DA address.
Alternately, two mobile phone numbers and one e-mail gateway access code can be entered.
Only one e-mail Gateway access code needs to be entered and then the individual e-mail
addresses can be entered separately in each GSM/SMS Function Block.
Validity Period
The Validity Period is a request to the SMS Service Provider to keep
the message on their Server for a length of time. Each Service
Provider may have their own policies with regard to this time period.
Please check the details with your local Service Provider.
Use the “+” and “-” keys to change the value within the range of 5 minutes to 63 weeks.
Se t SM
SMS 1
S
C
SMS 2C
DA1
DA2
DA3
VP
Se t SM
SMS 1
S
C
01
[]
9+- ) 0 3(12
Se t SMS
SMSC2
10
[]
9+- ) 0 3(12
Se t SMS
DA1
10
[]
9+- ) 0 3(12
V
Se t SMS
P
.0h24 r s