Specifications

Table Of Contents

2 Simple Application Controllers

SMS Messaging Diagnostics 4

4 - 5

Note

1 ) During GSM communication, the RS-232C pins 4 and 7 must be set high otherwise no

data will transferred and the GSM modem will appear to hang or experience a state of

suspension.

2 ) The

2 Series Controller and GSM modem must be powered ON simultaneously.

3 ) Having configured the GSM communication settings before operation, when the

2 Series

Controller and GSM modem are on-line, then the user must not change any settings from

VLS or the front panel keys. If such modifications have been made to the GSM communi-

cation settings, thus, the

2 Series Controller will stop communication with the GSM

modem.

4 ) The power to the

2 Series Controller must be cycled to accept the initial communication

settings. If modifications have been made to the communication settings, then please

cycle the power again.

5 ) Please check with your service provider concerning the @ symbol within an E-mail

address. The

symbol can be replaced with a

symbol if the user experiences some

difficulties with sending E-mail messages from the

2 Series Controller.

6 ) The Validity period of SMS messages is specified from the GSM function block or from the

front panel keys, however, if a certain time period is entered the user should not always

expect the same duration as the Service Provider can delete the message from their

server without notice.