Specifications

ManualsBrandsMITSUBISHI ManualsAutomotiveMitsubishi Canter FB/FE/FG Specifications.pdf

CONTENTS

■ GENERAL INFORMATION

■ BASIC MODELS & SPECIFICATIONS

1. MODEL CODING SYSTEM

2. BODY CODING SYSTEM

3. EXTERIOR COLOR & INTERIOR CODE

CLASSIFICATION OF EXPORT VEHICLE SPECIFICATIONS

5. WEIGHTS DEFINITION

6. SPECIFIC GRAVITY OF GOODS

7. CONVERSION TABLE

NOTE

The information in this material is accurate as of the date of publication.

Mitsubishi Fuso Truck and Bus Corporation reserves the right to make

changes in the specification, equipment or design, or to discontinue

models or options without notice at any time.

8TG4K0E066

1. CAB & CHASSIS

FB71A Series Spec. No. FB71, 1/9

FE71P/FE73P Series Spec. No. FE71/73, 1/11

FE83P/FE84P Series Spec. No. FE83/84, 1/13

FE85P Series Spec. No. FE85P, 1/9

FE85C-Z Series Spec. No. FE85C, 1/9

FG83P Series Spec. No. FG83, 1/9

2. CARGO & DUMP TRUCK

CARGO TRUCK

FB71A Series Spec. No. FB71-C, 1/2

FE71P Series Spec. No. FE71-C, 1/2

FE73P Series Spec. No. FE73-C, 1/2

FE83P Series Spec. No. FE83-C, 1/2

FE83P-W Series Spec. No. FE83W-C, 1/2

FE84P Series Spec. No. FE84-C, 1/2

FE85P Series Spec. No. FE85P-C, 1/2

FE85C-Z Series Spec. No. FE85C-C, 1/2

FG83P Series Spec. No. FG83-C, 1/2

FG83P-W Series Spec. No. FG83W-C, 1/2

DUMP TRUCK

FE71PBD4 Series Spec. No. FE71-D, 1/2

FE83PCD6 Series Spec. No. FE83-D, 1/2

Summary of content (94 pages)

PAGE 1
CONTENTS ■ GENERAL INFORMATION 1. MODEL CODING SYSTEM 2. BODY CODING SYSTEM 3. EXTERIOR COLOR & INTERIOR CODE 4. CLASSIFICATION OF EXPORT VEHICLE SPECIFICATIONS 5. WEIGHTS DEFINITION 6. SPECIFIC GRAVITY OF GOODS 7. CONVERSION TABLE ■ BASIC MODELS & SPECIFICATIONS 1. CAB & CHASSIS FB FB71A Series Spec. No. FB71, 1 / 9 FE FE71P / FE73P Series FE83P / FE84P Series FE85P Series FE85C-Z Series Spec. No. FE71 / 73, 1 / 11 Spec. No. FE83 / 84, 1 / 13 Spec. No. FE85P, 1 / 9 Spec. No.
PAGE 2
■ GENERAL INFORMATION 1.
PAGE 3
2. BODY CODING SYSTEM The BODY CODE mentioned the specification sheets of MITSUBISHI FUSO truck is used for MFTBC production arrangement, which is classified as mentioned below. BODY TYPE BODY CODE CARGO DUMP CA WOODEN CARGO CS ALL STEEL CARGO DA DROP TAIL DB DROP SIDE & TAIL DC DROP TAIL, U-SECTION DD SCOOP END You are kindly requested to use BODY TYPE (EX: WOODEN CARGO) and BODY CODE (EX: CA) at your order, so that we can follow your requiment adequately.
PAGE 4
. CLASSIFICATION OF EXPORT VEHICLE SPECIFICATIONS (1) Results of a detailed analysis of past export achievements conspicuously show features by area, such as the adoption of snorkel-type air intake in the Middle East and Africa and the adoption of two-speed rear axle in Latin America. Equipment and accessories show a similar tendency. Deciding specifications by country and order looks as if it satisfies the requirements of the owners greatly.
PAGE 5
. WEIGHTS DEFINITION A. Kerb Weight The sum of weights of cab and chassis with full tank of fuel, specified quantity of oil and coolant, exclusive of spare-tire and tools. Spare tire carrier and tool box, however, are included, if supplied. The truck must be in running order. B. Empty Vehicle Weight The sum of kerb weight and weight of body. C. Gross Vehicle Weight (G.V.W.) This is the empty vehicle weight plus weights of payload and crew. The actual G.V.W. may be less than but must not exceed the max.
PAGE 6
As illustrated in Fig. 1, when the load center coincides with the center of rear axle, the payload distribution on the front axle is zero. This would make the weight on the front axle extremely light and render steering difficult-if not impossible. Furthermore, since total payload would be placed on the rear axle, it cannot be greater than the capacity of the rear axle.
PAGE 7
6. SPECIFIC GRAVITY OF GOODS Specific gravity or apparent specific weight of a cargo varies depending on its ambient conditions (temperature, humidity, barometric pressure, etc.) and moisture content. For practical purposes, MFTBC uses the figures given in the following table for the specific gravity of cargoes, unless otherwise specified by local regulations or customer’s requirement. The table gives data only on cargoes commonly hauled.
PAGE 8
7. CONVERSION TABLE ■ MEASURES AND WEIGHTS Measure Area Volume cm in m ft yd km mile 1 0.39370 1 3.28084 1.09361 1 0.62137 2.540 1 0.30480 1 0.3333 1.60934 1 0.9144 3.0000 1 sq. cm sq. in sq. m sq. ft sq. yd sq. km sq. mile 1 0.1550 1 10.7639 1.19599 1 0.38610 6.4516 1 0.092903 1 0.1111 2.58999 1 0.083613 9.00 1 cu. m cu. ft cu. yd L U.S. gal lmp. gal 1 35.3147 1.3079 1 0.26417 0.21997 0.02832 1 0.37037 3.78543 1 0.83327 1 4.5460 1.
PAGE 9
■ BASIC MODELS & SPECIFICATIONS 1. CAB & CHASSIS Max. SERIES FB MODEL FB71AB8 Standard Cab Tilt 4x2 FE71PB8 FE71PBN4 FE73PB6 ENGINE CAB TYPE & DRIVE SYSTEM G.V.W. ton MODEL OUTPUT kW (PS) 3.5 4M40-0A 69 (94) 4D34-3A 80 (109) 7.2 4D34-2A 89 (120) 8.0 4D33-4A 96 (130) 5.5 4D34-3A 80 (109) 4.4 Standard Cab Tilt 4x2 4.7 5.7 FE73PE6 FE83PC6 FORWARD CONTROL FE83PE6 Wide Cab Tilt 4x2 6.0 FE FE83PE6W Wide Double Cab Fixed 4x2 FE84PC6 6.
PAGE 10
Spec. No. FB71, 1/9 1. Model of Chassis MODEL FB71AB8 G.V.W. kg (lb) 3,500 (7,715) ENGINE (Model) 4M40-0A WHEELBASE mm (in.) 2,500 (98.4) ANNOTATION (1) This model is primarily designed for rigid application. 2.
PAGE 11
Spec. No. FB71, 2/9 MITSUBISHI FUSO TRUCK CHASSIS TYPE: FORWARD CONTROL, TILT CAB CANTER DRIVE SYSTEM: 4 x 2, CREW: 3 ENGINE: 4M40-0A, DIESEL, 69 kW (94 PS)/4,000rpm G. V. W.: 3,500 kg (7,715 lb), TIRE: 7.00-15-6PR (Front) FB71A SERIES G. V. W.: 3,500 kg (7,715 lb), TIRE: 7.00-15-10PR (Rear) CHASSIS DIMENSIONS, WEIGHTS AND PERFORMANCE MODEL R.H.D. L.H.D. Dimensions FB71AB8R FB71AB8L mm (in.) Wheelbase Overall length Overall width Overall height, approx.
PAGE 12
Spec. No. FB71, 3/9 BASIC CHASSIS SPECIFICATIONS SERIES Clutch Model Type Facing material Facing outside dia.
PAGE 13
Spec. No.
PAGE 14
Spec. No. FB71, 5/9 BASIC CHASSIS SPECIFICATIONS (continued) SERIES Cab Mounting Construction Windshield Windshield wipers Driver's seat Passenger seat Appointments Paint Chassis Equipment Caution Plate Measurement FB71AB8 Fixed type, isolated 4 points Tilt type with torsion bars, all steel welded construction One piece type of laminated glass Dual blades, high & low speeds and intermittent wiping with washer and water tank 3 lits. (dm3) (0.66 Imp.gals. or 0.79 U.S.gals.
PAGE 15
Spec. No. FB71, 6/9 BASIC ENGINE SPECIFICATIONS CHASSIS MODEL Engine Model Type No. of Cylinders Bore x Stroke Piston Displacement Compression Ratio Max. Output Max.
PAGE 16
Spec. No. FB71, 7/9 ENGINE PERFORMANCE CURVES 70 (95) 60 (82) DIN JIS 40 (54) lb/hp·h 30 (41) 1600 326 B. S. F. C 20 (27) 0.50 (240) 299 (220) 0.45 272 (200) 0.
PAGE 17
Spec. No. FB71, 8/9 CHASSIS LAYOUT 700 1360 1695 FB71AB8L 985 470 3190 2030 2005 (APPROX) 102 7.00-15-6PR 1405 1000 2500 4660 7.00-1510PR 1160 NOTE : These drawings show left hand drive model. For right hand drive model, exterior rear view mirror and windshield wiper on left and right sides are symmetric with respect to the chassis center line.
PAGE 18
Spec. No.
PAGE 19
Spec. No. FE71/73, 1/11 1. Model of Chassis MODEL FE71PB8 FE71PBN4 G.V.W. kg (lb) 4,400 (9,700) 4,700 (10,360) ENGINE (Model) FE73PB6 FE73PE6 5,700 (12,565) 4D34-3A WHEELBASE mm (in.) 2,500 (98.4) 3,350 (131.9) ANNOTATION (1) These models are primarily designed for rigid application. 2.
PAGE 20
Spec. No. FE71/73, 2/11 MITSUBISHI FUSO TRUCK CHASSIS TYPE: FORWARD CONTROL, TILT CAB CANTER DRIVE SYSTEM: 4 x 2, CREW: 3 ENGINE: 4D34-3A, DIESEL, 80 kW (109 PS)/3,200 rpm G. V. W. : 4,400 kg ( 9,700 lb), TIRE: 7.50-15-10PR FE71P SERIES G. V. W. : 4,700 kg (10,360 lb), TIRE: 6.50-16-10PR CHASSIS DIMENSIONS, WEIGHTS AND PERFORMANCE R.H.D. L.H.D. Dimensions mm (in.) Wheelbase Overall length Overall width Overall height, approx. Tread, front Tread, rear Ground clearance , approx.
PAGE 21
Spec. No. FE71/73, 3/11 MITSUBISHI FUSO TRUCK CHASSIS TYPE: FORWARD CONTROL, TILT CAB CANTER DRIVE SYSTEM: 4 x 2, CREW: 3 ENGINE: 4D34-3A, DIESEL, 80 kW (109 PS)/3,200 rpm G. V. W. : 5,700 kg (12,565 lb), TIRE: 7.00-16-10PR FE73P SERIES CHASSIS DIMENSIONS, WEIGHTS AND PERFORMANCE R.H.D. L.H.D. Dimensions mm (in.) Wheelbase Overall length Overall width Overall height, approx. Tread, front Tread, rear Ground clearance , approx.
PAGE 22
Spec. No. FE71/73, 4/11 BASIC CHASSIS SPECIFICATIONS SERIES Clutch Model Type Facing material Facing outside dia. Facing thickness Total frictional area Transmission Model Type Gear ratios Control Recommended oil grade Propeller Shaft Model Size Type Joints Rear Axle Model Type Capacity Final reduction gear Model Ratio Recommended oil grade Front Axle Model Type Capacity Tires and Disc Wheels Tire size Tread pattern Disc wheel size Type-offset-thickness Steering System Type Gear ratio Steering wheel dia.
PAGE 23
Spec. No. FE71/73, 5/11 BASIC CHASSIS SPECIFICATIONS (continued) SERIES Suspensions Springs Type Rating, ground FE71PB8 1,100 kg (2,425 lb), each 1,400 kg (3,085 lb), each Rear mm (in.
PAGE 24
Spec. No. FE71/73, 6/11 BASIC CHASSIS SPECIFICATIONS (continued) SERIES Cab Mounting Construction Windshield Windshield wipers Driver's seat Passenger seat Appointments Paint Chassis Equipment Caution Plate Measurement FE71P, FE73P Fixed type, isolated 4 points Tilt type torsion bar, all steel welded construction One piece type of laminated glass Dual blades, high & low speeds and intermittent wiping with washer and water tank 3 lits. (dm3) (0.66 Imp.gals. or 0.79 U.S.gals.
PAGE 25
Spec. No. FE71/73, 7/11 BASIC ENGINE SPECIFICATIONS CHASSIS MODEL Engine Model Type No. of Cylinders Bore x Stroke Piston Displacement Compression Ratio Max. Output Max.
PAGE 26
Spec. No. FE71/73, 8/11 ENGINE PERFORMANCE CURVES TORQUE 255 (26) 235 (24) 216 (22) 196 (20) g/kW·h (g/PS·h) 70 (95) 60 (82) SAE DIN JIS 50 (68) 40 (54) 30 (41) 0.45 272 (200) 245 (180) 218 0.35 (160) B. S. F. C 1400 1800 2200 0.
PAGE 27
Spec. No. FE71/73, 9/11 CHASSIS LAYOUT 1695 700 1380 FE71PB8L 985 470 3095 2030 2005 (APPROX) 102 7.50-15-10PR 1390 1000 2500 4660 1065 95 1075 55 700 1235 1695 FE71PBN4L 985 470 3105 2030 1995 (APPROX) 102 6.50-16-10PR 1390 1000 2500 4630 NOTE : These drawings show left hand drive model. For right hand drive model, exterior rear view mirror and windshield wiper on left and right sides are symmetric with respect to the chassis center line.
PAGE 28
Spec. No. FE71/73, 10/11 CHASSIS LAYOUT 700 1435 1870 1695 FE73PB6L 985 470 3105 2030 2055 (APPROX) 102 7.00-16-10PR 1000 1390 2500 4575 1075 700 1435 1870 1695 FE73PE6L 985 470 4360 2880 2055 (APPROX) 102 7.00-16-10PR 1390 1000 3350 5885 1480 55 NOTE : These drawings show left hand drive model. For right hand drive model, exterior rear view mirror and windshield wiper on left and right sides are symmetric with respect to the chassis center line.
PAGE 29
Spec. No.
PAGE 30
Spec. No. FE83/84, 1/13 1. Model of Chassis FE83PC6 MODEL G.V.W. kg (Ib) FE83PE6 FE83PE6W (Double cab) FE84PC6 6,000 (13,230) ENGINE (Model) FE84PE6 6,500 (14,330) 4D34-3A WHEELBASE mm (in.) 2,750 (108.3) 3,350 (131.9) 3,350 (131.9) 2,750 (108.3) 3,350 (131.9) ANNOTATION (1) These models are primarily designed for rigid application. 2.
PAGE 31
Spec. No. FE83/84, 2/13 MITSUBISHI FUSO TRUCK CHASSIS TYPE: FORWARD CONTROL, TILT CAB (EXCEPT DOUBLE CAB) CANTER DRIVE SYSTEM: 4 x 2, CREW: 3...SINGLE CAB DRIVE SYSTEM: 4 x 2, CREW: 7...DOUBLE CAB ENGINE: 4D34-3A, DIESEL, 80 kW (109 PS)/3,200 rpm FE83P SERIES G.V.W.: 6,000 kg (13,230 lb), TIRE: 7.00-16-12PR CHASSIS DIMENSIONS, WEIGHTS AND PERFORMANCE R.H.D. L.H.D. Dimensions mm (in.) FE83PC6R FE83PC6L FE83PE6R FE83PE6L FE83PE6WR FE83PE6WL Wheelbase Overall length Overall width Overall height, approx.
PAGE 32
Spec. No. FE83/84, 3/13 MITSUBISHI FUSO TRUCK CHASSIS TYPE: FORWARD CONTROL, TILT CAB CANTER DRIVE SYSTEM: 4 x 2, CREW: 3 ENGINE: 4D34-3A, DIESEL, 80 kW (109 PS)/3,200 rpm G.V.W.: 6,500 kg (14,330 lb), TIRE: 7.00-16-12PR FE84P SERIES CHASSIS DIMENSIONS, WEIGHTS AND PERFORMANCE MODEL R.H.D. L.H.D. Dimensions mm (in.) FE84PC6R FE84PC6L FE84PE6R FE84PE6L Wheelbase Overall length Overall width Overall height, approx. Tread, front Tread, rear Ground clearance, approx.
PAGE 33
Spec. No. FE83/84, 4/13 BASIC CHASSIS SPECIFICATIONS SERIES Clutch Model Type Facing material Facing outside dia. Facing thickness Total frictional area Transmission Model Type Gear ratios Control Recommended oil grade Propeller Shaft Model Size Type Joints Rear Axle Model Type Capacity Final reduction gear Model Ratio Recommended oil grade Front Axle Model Type Capacity Tires and Disc Wheels Tire size Tread pattern Disc wheel size Type-offset-thickness Steering System Type Gear ratio Steering wheel dia.
PAGE 34
Spec. No. FE83/84, 5/13 BASIC CHASSIS SPECIFICATIONS (continued) SERIES Suspensions Springs Type Rating, ground Front Rear Dimensions Front FE83P FE84P Semi-elliptic, laminated leaf springs 1,200 kg (2,645 lb), each 2,100 kg (4,630 lb), each 2,400 kg (5,290 lb), each Span x Width x Thickness No. of leaves 1,200 mm x 70 mm x 10 mm 5 (47.2 in. x 2.76 in. x 0.39 in.) 10 mm 1 11 mm 5 0.39 in. (49.2 in. x 2.76 in. x ) 0.43 in. 11 mm 4 10 mm 1 0.43 in. (49.2 in. x 2.76 in. x ) 0.39 in.
PAGE 35
Spec. No.
PAGE 36
Spec. No. FE83/84, 7/13 BASIC ENGINE SPECIFICATIONS CHASSIS MODEL Engine Model Type No. of Cylinders Bore x Stroke Piston Displacement Compression Ratio Max. Output Max.
PAGE 37
Spec. No. FE83/84, 8/13 ENGINE PERFORMANCE CURVES TORQUE 255 (26) 235 (24) 216 (22) 196 (20) g/kW·h (g/PS·h) kW(PS): JIS & DIN kW(hp): SAE, Gross 80 (109) 185 175 165 155 145 lb/hp·h lb·ft N·m (kgf·m) MITSUBISHI FUSO 4D34-3A DIESEL ENGINE 70 (95) 60 (82) OUTPUT 50 (68) 40 (54) 30 (41) 0.45 272 (200) 245 (180) 218 0.35 (160) B. S. F. C 1400 1800 2200 0.
PAGE 38
Spec. No. FE83/84, 9/13 CHASSIS LAYOUT FE83PC6L 750 1495 1995 FE83PC6L 1088 525 3490 2225 2200 (APPROX) 38 7.00-16-12PR 1655 1145 2750 5215 1265 55 1995 750 1495 FE83PE6L 1088 525 4305 2825 2200 (APPROX) 38 7.00-16-12PR 1655 1145 3350 6030 1480 55 NOTE : These drawings show left hand drive model. For right hand drive model, exterior rear view mirror and windshield wiper on left and right sides are symmetric with respect to the chassis center line.
PAGE 39
Spec. No. FE83/84, 10/13 CHASSIS LAYOUT FE83PE6WL 750 1495 1995 FE83PE6WL 1088 1525 3305 1825 2260 (APPROX) 28 7.00-16-12PR 1655 1145 3350 6030 1480 55 NOTE : These drawings show left hand drive model. For right hand drive model, exterior rear view mirror and windshield wiper on left and right sides are symmetric with respect to the chassis center line.
PAGE 40
Spec. No. FE83/84, 11/13 CHASSIS LAYOUT FE84PC6L 753 1495 1995 FE84PC6L 1088 525 3490 2225 2200 (APPROX) 38 7.00-16-12PR 1665 1145 2750 5215 1265 55 FE84PE6L 753 1495 1995 FE84PE6L 1088 525 4305 2825 2200 (APPROX) 38 7.00-16-12PR 1665 1145 3350 6030 1480 55 NOTE : These drawings show left hand drive model. For right hand drive model, exterior rear view mirror and windshield wiper on left and right sides are symmetric with respect to the chassis center line.
PAGE 41
Spec. No.
PAGE 42
Spec. No. FE83/84, 13/13 FE83P/84P SERIES OPTIONAL EQUIPMENT (2 2) CHASSIS Exhaust brake Vacuum operated, butterfly valve type, standard for FE84P series Fuel tank, spare 70 lits. (dm3) with key Adds to main fuel tank 100 lits. (dm3), only for FE83PE, FE84PE 80 Ah (288 kC) at 20 hr rate (95D31L) x 2 Heavy duty battery 64 Ah (230 kC) at 5 hr rate (95D31L) x 2 Lockable fuel tank cap 10 mm-2 0.39 in. ( 47.2 in. x 2.76 in. x ) 11 mm-3 0.43 in. Ground rating: 1,300 kg (2,865 lb) 11 mm 4 0.43 in.
PAGE 43
Spec. No. FE85P, 1/9 1. Model of Chassis MODEL FE85PC6 FE85PE6 G.V.W. kg (Ib) 7,200 (15,875) ENGINE (Model) 4D34-2A WHEELBASE mm (in.) 2,750 (108.3) 3,350 (131.9) FE85PG6 3,850 (151.6) ANNOTATION (1) These models are primarily designed for rigid application. 2.
PAGE 44
Spec. No. FE85P, 2/9 MITSUBISHI FUSO TRUCK CHASSIS TYPE: FORWARD CONTROL, TILT CAB CANTER DRIVE SYSTEM: 4 x 2, CREW: 3 ENGINE: 4D34-2A, DIESEL, 89 kW (120 PS)/3,200 rpm FE85P SERIES G. V. W.: 7,200 kg (15,875 lb), TIRE: 7.50-16-10PR CHASSIS DIMENSIONS, WEIGHTS AND PERFORMANCE R.H.D. L.H.D. Dimensions mm (in.) Wheelbase Overall length Overall width Overall height, approx. Tread, front Tread, rear Ground clearance, approx.
PAGE 45
Spec. No. FE85P, 3/9 BASIC CHASSIS SPECIFICATIONS SERIES Clutch Model Type Facing material Facing outside dia.
PAGE 46
Spec. No.
PAGE 47
Spec. No. FE85P, 5/9 BASIC CHASSIS SPECIFICATIONS (continued) SERIES Cab Mounting Construction Windshield Windshield wipers Driver's seat Passenger seat Appointments Paint Chassis Equipment Caution Plate Measurement FE85P Fixed type, isolated 4 points Tilt type with torsion bar, all steel welded construction One piece type of laminated glass Dual blades, high & low speeds and intermittent wiping with washer and water tank 3 lits. (dm3) (0.66 Imp.gals. or 0.79 U.S.gals.
PAGE 48
Spec. No. FE85P, 6/9 BASIC ENGINE SPECIFICATIONS CHASSIS MODEL Engine Model Type No. of Cylinders Bore x Stroke Piston Displacement Compression Ratio Max. Output Max.
PAGE 49
Spec. No. FE85P, 7/9 ENGINE PERFORMANCE CURVES VEHICLE PERFORMANCE CURVES MITSUBISHI FUSO 4D34-2A DIESEL ENGINE lb·ft N·m (kgf·m) FE85PC6 FE85PE6 FE85PG6 · · 80 (109) 70 (95) SAE DIN JIS 60 (82) lb/hp·h g/kW·h (g/PS·h) 50 (68) 40 (54) 0.45 272 (200) 245 (180) 218 0.35 (160) B. S. F. C 30 (41) 1200 1600 1800 2000 2400 0.
PAGE 50
Spec. No. FE85P, 8/9 CHASSIS LAYOUT 753 1560 2035 1995 FE85PE6L 1088 525 4305 2825 2210 (APPROX) 38 7.50-16-10PR 1665 1145 3350 6030 55 1480 FE85PG6L 525 5025 3325 2210 (APPROX) 38 7.50-16-10PR 1665 1145 3850 6750 1700 NOTE : These drawings show left hand drive model. For right hand drive model, exterior rear view mirror and windshield wiper on left and right sides are symmetric with respect to the chassis center line.
PAGE 51
Spec. No.
PAGE 52
Spec. No. FE85C, 1/9 1. Model of Chassis MODEL FE85CGZ FE85CHZ G.V.W. kg (Ib) 8,000 (17,635) ENGINE (Model) 4D33-4A WHEELBASE mm (in.) 3,870 (152.4) 4,170 (164.2) ANNOTATION (1) These models are primarily designed for rigid application. 2.
PAGE 53
Spec. No. FE85C, 2/9 MITSUBISHI FUSO TRUCK CHASSIS TYPE: FORWARD CONTROL, TILT CAB CANTER DRIVE SYSTEM: 4 x 2, CREW: 3 ENGINE: 4D33-4A, DIESEL, 96 kW (130 PS)/3,200 rpm FE85C-Z SERIES G. V. W. : 8,000 kg (17,635 lb), TIRE: 7.50-16-14PR CHASSIS DIMENSIONS, WEIGHTS AND PERFORMANCE FE85CGZR FE85CGZL FE85CHZR FE85CHZL Wheelbase Overall length Overall width Overall height, approx. Tread, front Tread, rear Ground clearance, approx.
PAGE 54
Spec. No. FE85C, 3/9 BASIC CHASSIS SPECIFICATIONS SERIES Clutch Model Type Facing material Facing outside dia.
PAGE 55
Spec. No.
PAGE 56
Spec. No. FE85C, 5/9 BASIC CHASSIS SPECIFICATIONS (continued) SERIES Cab Mounting Construction Windshield Windshield wipers Driver's seat Passenger seat Appointments Paint Chassis Equipment Caution Plate Measurement FE85C-Z Fixed type, isolated 4 points Tilt type with torsion bar, all steel welded construction One piece type of laminated glass Dual blades, high & low speeds and intermittent wiping with washer and water tank 3 lits. (dm3) (0.66 Imp.gals. or 0.79 U.S.gals.
PAGE 57
Spec. No. FE85C, 6/9 BASIC ENGINE SPECIFICATIONS CHASSIS MODEL Engine Model Type No. of Cylinders Bore x Stroke Piston Displacement Compression Ratio Max. Output Max.
PAGE 58
Spec. No. FE85C, 7/9 ENGINE PERFORMANCE CURVES 220 210 200 190 180 170 100 (136) 80 (109) SAE 70 (95) JIS 60 (82) lb/hp·h 50 (68) 0.45 272 (200) 40 (54) 30 (41) B. S. F. C 245 0.40 (180) 218 0.
PAGE 59
Spec. No. FE85C, 8/9 CHASSIS LAYOUT 840 1660 2135 1995 FE85CGZL 1088 525 4985 3345 2220 (APPROX) 38 7.50-16-14PR 1665 1145 3870 6735 1640 80 840 1660 2135 1995 FE85CHZL 1088 525 5460 3645 2220 (APPROX) 38 7.50-16-14PR 1665 1145 4170 7210 1815 80 NOTE : These drawings show left hand drive model. For right hand drive model, exterior rear view mirror and windshield wiper on left and right sides are symmetric with respect to the chassis center line.
PAGE 60
Spec. No.
PAGE 61
Spec. No. FG83, 1/9 1. Model of Chassis MODEL FG83PC6 G.V.W. kg (lb) 5,500 (12,125) ENGINE (Model) 4D34-3A WHEELBASE mm (in.) FG83PE6W (Double cab) FG83PE6 2,860 (112.6) 3,460 (136.2) ANNOTATION (1) These models are primarily designed for rigid application. 2.
PAGE 62
Spec. No. FG83, 2/9 MITSUBISHI FUSO TRUCK CHASSIS TYPE: FORWARD CONTROL, TILT CAB (EXCEPT DOUBLE CAB) CANTER DRIVE SYSTEM: 4 x 4, CREW: 3 SINGLE CAB DRIVE SYSTEM: 4 x 4, CREW: 7 DOUBLE CAB ENGINE: 4D34-3A, DIESEL, 80 kW (109 PS)/3,200 rpm FG83P SERIES G.V.W.: 5,500 kg (12,125 lb), TIRE: 7.50-16-10PR CHASSIS DIMENSIONS, WEIGHTS AND PERFORMANCE FG83PC6R FG83PC6L FG83PE6R FG83PE6L FG83PE6WR FG83PE6WL Wheelbase Overall length Overall width Overall height, approx.
PAGE 63
Spec. No. FG83, 3/9 BASIC CHASSIS SPECIFICATIONS SERIES Clutch Model Type Facing material Facing outside dia.
PAGE 64
Spec. No. FG83, 4/9 BASIC CHASSIS SPECIFICATIONS (continued) SERIES Suspensions Springs Type Rating, ground Front Rear Dimensions Semi–elliptic, laminated leaf springs 1,300 kg (2,865 lb), each 2,400 kg (5,290 lb), each Span x Width x Thickness-No.
PAGE 65
Spec. No. FG83, 5/9 BASIC CHASSIS SPECIFICATIONS (continued) SERIES Cab Mounting Construction Windshield Windshield wipers Driver's seat Passenger seat Rear seat Appointments Paint Chassis Equipment Caution Plate Measurement FG83P Fixed type, isolated 4 points (isolated 6 points for FG83PE6W) Tilt type with torsion bar, all steel welded construction (fixed cab for FG83PE6W) One piece type of laminated glass Dual blades, high & low speeds and intermittent wiping with washer and water tank 3 lits.
PAGE 66
Spec. No. FG83, 6/9 BASIC ENGINE SPECIFICATIONS CHASSIS MODEL Engine Model Type No. of Cylinders Bore x Stroke Piston Displacement Compression Ratio Max. Output Max.
PAGE 67
Spec. No. FG83, 7/9 ENGINE PERFORMANCE CURVES VEHICLE PERFORMANCE CURVES MITSUBISHI FUSO 4D34-3A DIESEL ENGINE g/kW·h (g/PS·h) · · TORQUE 255 (26) 235 (24) 216 (22) 196 (20) 70 (95) 60 (82) 50 (68) 40 (54) 30 (41) 0.45 B. S. F. C 1400 1800 2200 272 (200) 245 (180) 218 0.35 (160) 0.
PAGE 68
Spec. No. FG83, 8/9 CHASSIS LAYOUT FG83PE6L 750 1560 2035 1995 FG83PE6L 1073 540 4395 2920 2435 (APPROX) 38 7.50-16-10PR 1130 1665 3460 6120 1475 55 1475 55 750 1560 2035 1995 FG83PE6WL 1073 1540 3395 1920 2495 (APPROX) 28 7.50-16-10PR 1665 1130 3460 6120 NOTE : These drawings show left hand drive model. For right hand drive model, exterior rear view mirror and windsheld wiper on left and right sides are symmetric with respect to the chassis center line.
PAGE 69
Spec. No.
PAGE 70
■ BASIC MODELS & SPECIFICATIONS 2. CARGO & DUMP TRUCK CARGO SERIES MODEL Max. G.V.W. ton DUMP Wooden Steel Drop Tail Drop Side & Tail Drop Tail-U Scoop End CA CS DA DB DC DD Payload kg FB Body Capacity cu.m FB71AB8 3.5 1,570 — — — — — FE71PB8 4.4 2,210 — — — — — FE71PBD4 4.7 — — — 1.6 — — 3,305 — — — — — FE73PE6 3,160 — — — — — FE83PC6 3,420 — — — — — — — — 1.
PAGE 71
Spec. No. FB71 C, 1 2 MITSUBISHI FUSO CARGO TRUCK TYPE: FORWARD CONTROL, TILT CAB CANTER DRIVE SYSTEM:: 4 x 2, CREW: 3 ENGINE: 4M40-0A, DIESEL, 69 kW (94 PS)/4,000 rpm G. V. W.: 3,500 kg (7,715 lb), TIRE: 7.00-15- 6PR (Front) FB71A SERIES T.R. B.W. O.W. 1695mm T.F. G. V. W.: 3,500 kg (7,715 lb), TIRE: 7.00-15-10PR (Rear) H. B.H. B.L. O.S. F.O.H. W.B. O.A.L. R.O.H.
PAGE 72
Spec. No. FB71 C, 2 2 FB71A SERIES CARGO BODY SPECIFICATIONS BODY TYPE Floor Cross sill height x width Floor board thickness Floor frame Guard Frame Outside post thickness Upper rail thickness Horizontal rail thickness Vertical pillar thickness Header panel thickness Side & Rear Gate Top rail thickness Side post thickness Bottom rail thickness Board & panel thickness Accessories Rope hook diameter Rear fender thickness Side gate support Wooden cargo Plywood 72 mm x 40 mm or 35 mm (2.83 in. x 1.57 in.
PAGE 73
Spec. No. FE71 C, 1 2 T.R. B.W. O.W. 1695mm T.F. MITSUBISHI FUSO CARGO TRUCK TYPE: FORWARD CONTROL, TILT CAB CANTER DRIVE SYSTEM: 4 x 2, CREW: 3 ENGINE: 4D34-3A, DIESEL, 80 kW (109PS)/3,200 rpm G.V.W.: 4,400 kg (9,700 lb), TIRE: 7.50-15-10PR FE71P SERIES H. B.H. B.L. O.S. F.O.H. W.B. O.A.L. R.O.H. DIMENSIONS, WEIGHTS AND PERFORMANCE MODEL BODY TYPE PAYLOAD CAPACITY BODY CODE Dimensions Wheelbase Overall length Overall width Overall height, approx.
PAGE 74
Spec. No.
PAGE 75
Spec. No. FE73 C, 1 2 T.R. B.W. O.W. 1695mm T.F. MITSUBISHI FUSO CARGO TRUCK TYPE: FORWARD CONTROL, TILT CAB CANTER DRIVE SYSTEM: 4 x 2, CREW: 3 ENGINE: 4D34-3A, DIESEL, 80 kW (109PS)/3,200 rpm G.V.W.: 5,700 kg (12,565 lb), TIRE: 7.00-16-10PR FE73P SERIES H. B.H. B.L. O.S. F.O.H. W.B. O.A.L. R.O.H. DIMENSIONS, WEIGHTS AND PERFORMANCE MODEL BODY TYPE PAYLOAD CAPACITY BODY CODE Dimensions Wheelbase Overall length Overall width Overall height, approx.
PAGE 76
Spec. No.
PAGE 77
Spec. No. FE83 C, 1 2 T.R. B.W. O.W. T.F. 1995mm MITSUBISHI FUSO CARGO TRUCK TYPE: FORWARD CONTROL, TILT CAB CANTER DRIVE SYSTEM: 4 x 2, CREW: 3 ENGINE: 4D34-3A, DIESEL, 80 kW (109 PS)/3,200 rpm G.V.W.: 6,000 kg (13,230 lb), TIRE: 7.00-16-12PR FE83P SERIES H. B.H. B.L. O.S. F.O.H. W.B. O.A.L. R.O.H. DIMENSIONS, WEIGHTS AND PERFORMANCE MODEL BODY TYPE PAYLOAD CAPACITY BODY CODE Dimensions Wheelbase Overall length Overall width Overall height, approx.
PAGE 78
Spec. No. FE83 C, 2 2 FE83P SERIES CARGO BODY SPECIFICATIONS BODY TYPE Floor Main sill height x width x thickness Cross sill height x width Floor board thickness Floor frame Guard Frame Outside post thickness Upper rail thickness Horizontal rail thickness Vertical pillar thickness Header panel thickness Side & Rear Gate Top rail thickness Side post thickness Bottom rail thickness Board & panel thickness Accessories Rope hook diameter Rear fender thickness Side gate support Wooden cargo 90 mm x 40 mm x 2.
PAGE 79
Spec. No. FE83W C, 1 2 T.R. B.W. O.W. 1995mm T.F. MITSUBISHI FUSO CARGO TRUCK TYPE: FORWARD CONTROL, FIXED DOUBLE CAB CANTER DRIVE SYSTEM: 4 x 2, CREW: 7 ENGINE: 4D34-3A, DIESEL, 80 kW (109 PS)/3,200 rpm FE83P-W SERIES G.V.W.: 6,000 kg (13,230 lb), TIRE: 7.00-16-12PR H. B.H. B.L. O.S. F.O.H. W.B. O.A.L. R.O.H. DIMENSIONS, WEIGHTS AND PERFORMANCE MODEL BODY TYPE PAYLOAD CAPACITY BODY CODE Dimensions Wheelbase Overall length Overall width Overall height, approx.
PAGE 80
Spec. No.
PAGE 81
Spec. No. FE84 C, 1 2 T.R. B.W. O.W. T.F. 1995mm MITSUBISHI FUSO CARGO TRUCK TYPE: FORWARD CONTROL, TILT CAB CANTER DRIVE SYSTEM: 4 x 2, CREW: 3 ENGINE: 4D34-3A, DIESEL, 80 kW (109 PS)/3,200 rpm G.V.W.: 6,500 kg (14,330 lb), TIRE: 7.00-16-12PR FE84P SERIES H. B.H. B.L. O.S. F.O.H. W.B. O.A.L. R.O.H. DIMENSIONS, WEIGHTS AND PERFORMANCE MODEL BODY TYPE PAYLOAD CAPACITY BODY CODE Dimensions Wheelbase Overall length Overall width Overall height, approx.
PAGE 82
Spec. No. FE84 C, 2 2 FE84P SERIES CARGO BODY SPECIFICATIONS BODY TYPE Floor Main sill height x width x thickness Cross sill height x width Floor board thickness Floor frame Guard Frame Outside post thickness Upper rail thickness Horizontal rail thickness Vertical pillar thickness Header panel thickness Side & Rear Gate Top rail thickness Side post thickness Bottom rail thickness Board & panel thickness Accessories Rope hook diameter Rear fender thickness Side gate support Wooden cargo 90 mm x 40 mm x 2.
PAGE 83
Spec. No. FE85P C, 1 2 T.R. B.W. O.W. T.F. 1995mm MITSUBISHI FUSO CARGO TRUCK TYPE: FORWARD CONTROL, TILT CAB CANTER DRIVE SYSTEM: 4 x 2, CREW: 3 ENGINE: 4D34-2A, DIESEL, 89 kW (120 PS)/3,200 rpm FE85P SERIES G.V.W.: 7,200 kg (15,875 lb), TIRE: 7.50-16-10PR H. B.H. B.L. O.S. F.O.H. W.B. O.A.L. R.O.H. DIMENSIONS, WEIGHTS AND PERFORMANCE MODEL BODY TYPE PAYLOAD CAPACITY BODY CODE Dimensions Wheelbase Overall length Overall width Overall height, approx.
PAGE 84
Spec. No. FE85P C, 2 2 FE85P SERIES CARGO BODY SPECIFICATIONS BODY TYPE Floor Main sill height x width x thickness Cross sill height x width Floor board thickness Floor frame Guard Frame Outside post thickness Upper rail thickness Horizontal rail thickness Vertical pillar thickness Header panel thickness Side & Rear Gate Top rail thickness Side post thickness Bottom rail thickness Board & panel thickness Accessories Rope hook diameter Rear fender thickness Side gate support Wooden cargo 90 mm x 40 mm x 2.
PAGE 85
Spec. No. FE85C C, 1 2 T.R. B.W. O.W. T.F. 1995mm MITSUBISHI FUSO CARGO TRUCK TYPE: FORWARD CONTROL, TILT CAB CANTER DRIVE SYSTEM: 4 x 2, CREW: 3 ENGINE: 4D33-4A, DIESEL, 96 kW (130 PS)/3,200 rpm G.V.W.: 8,000 kg (17,635 lb), TIRE: 7.50-16-14PR FE85C-Z SERIES B.L. H. B.H. O.S. F.O.H. W.B. O.A.L. R.O.H. DIMENSIONS, WEIGHTS AND PERFORMANCE MODEL BODY TYPE PAYLOAD CAPACITY BODY CODE Dimensions Wheelbase Overall length Overall width Overall height, approx.
PAGE 86
Spec. No.
PAGE 87
Spec. No. FG83 C, 1 2 T.R. B.W. O.W. 1995mm T.F. MITSUBISHI FUSO CARGO TRUCK TYPE: FORWARD CONTROL, TILT CAB CANTER DRIVE SYSTEM: 4 x 4, CREW: 3 ENGINE: 4D34-3A, DIESEL, 80 kW (109 PS)/3,200 rpm G.V.W.: 5,500 kg (12,125 lb), TIRE: 7.50-16-10PR FG83P SERIES H. B.H. B.L. O.S. F.O.H. W.B. O.A.L. R.O.H. DIMENSIONS, WEIGHTS AND PERFORMANCE MODEL BODY TYPE PAYLOAD CAPACITY BODY CODE Dimensions Wheelbase Overall length Overall width Overall height, approx.
PAGE 88
Spec. No. FG83 C, 2 2 FG83P SERIES CARGO BODY SPECIFICATIONS BODY TYPE Floor Main sill height x width x thickness Cross skill height x width Floor board thickness Floor frame Guard Frame Outside post thickness Upper rail thickness Horizontal rail thickness Vertical pillar thickness Header panel thickness Side & Rear Gate Top rail thickness Side post thickness Bottom rail thickness Board & panel thickness Accessories Rope hook diameter Rear fender thickness Side gate support Wooden cargo 90 mm x 40 mm x 2.
PAGE 89
Spec. No. FG83W C, 1 2 T.R. B.W. O.W. 1995mm T.F. MITSUBISHI FUSO CARGO TRUCK TYPE: FORWARD CONTROL, FIXED DOUBLE CAB CANTER DRIVE SYSTEM: 4 x 4, CREW: 7 ENGINE: 4D34-3A, DIESEL, 80 kW (109 PS)/3,200 rpm G.V.W.: 5,500 kg (12,125 lb), TIRE: 7.50-16-10PR FG83P-W SERIES B.H. H. B.L. O.S. F.O.H. W.B. O.A.L. R.O.H. DIMENSIONS, WEIGHTS AND PERFORMANCE MODEL BODY TYPE PAYLOAD CAPACITY BODY CODE Dimensions Wheelbase Overall length Overall width Overall height, approx.
PAGE 90
Spec. No.
PAGE 91
Spec. No. FE71 D, 1 2 B.W. (1690) T.F. O.W. MITSUBISHI FUSO DUMP TRUCK TYPE: FORWARD CONTROL, TILT CAB CANTER DRIVE SYSTEM: 4 x 2, CREW: 3 ENGINE: 4D34-3A, DIESEL, 80 kW (109 PS)/3,200 rpm G.V.W.: 4,700 kg (10,360 lb), TIRE: 6.50-16-10PR FE71PBD4 SERIES F.O.H. W.B. H. B.H. O.S. 60˚ B.L. R.O.H. T.R. O.A.L. DIMENSIONS, WEIGHTS AND PERFORMANCE MODEL BODY TYPE BODY CAPACITY BODY CODE Dimensions Wheelbase Overall length Overall width Overall height, approx.
PAGE 92
Spec. No. FE71 D, 2 2 FE71PBD4 SERIES DUMP BODY SPECIFICATIONS BODY TYPE Body Floor Front panel Side panel Tail panel Type of Tipping Gear Pump Type Capacity Hoist Type Bore x stroke Tipping Performance Angle of tip Lifting time Lowering time Drop side & tail thickness thickness thickness thickness 3.2 mm (0.13 in.) 2.3 mm (0.09 in.) 3.2 mm (0.13 in.) 3.2 mm (0.13 in.) Under body, hydraulic cylinder with link mechanism Gear type (KPC-25) 24.8 cc/rev (1.52 cu.in.
PAGE 93
Spec. No. FE83 D, 1 2 B.W. (1990) T.F. O.W. MITSUBISHI FUSO DUMP TRUCK TYPE: FORWARD CONTROL, TILT CAB CANTER DRIVE SYSTEM: 4 x 2, CREW: 3 ENGINE: 4D34-3A, DIESEL, 80 kW (109 PS)/3,200 rpm G.V.W.: 6,000 kg (13,230 lb), TIRE: 7.00-16-12PR FE83PCD6 SERIES B.L. F.O.H. W.B. H. B.H. 55˚ O.S. R.O.H. T.R. O.A.L. DIMENSIONS, WEIGHTS AND PERFORMANCE MODEL BODY TYPE BODY CAPACITY BODY CODE Dimensions Wheelbase Overall length Overall width Overall height, approx.
PAGE 94
Spec. No. FE83 D, 2 2 FE83PCD6 SERIES DUMP BODY SPECIFICATIONS BODY TYPE Body Floor Front panel Side panel Tail panel Type of Tipping Gear Pump Type Capacity Hoist Type Bore x stroke Tipping Performance Angle of tip Lifting time Lowering time Drop side & tail thickness thickness thickness thickness 3.2 mm (0.13 in.) 2.3 mm (0.09 in.) 3.2 mm (0.13 in.) 3.2 mm (0.13 in.) Under body, hydraulic cylinder with link mechanism Gear type (KPC-25) 24.8 cc/rev (1.52 cu.in.